Abstract:Rotating instability (RI) is an obvious unsteady flow phenomenon occurring in the tip region of compressors, which is potentially linked to tip clearance flow noise, blade vibration and rotating stall/surge. The existing investigations for RI indicate the origins of RI are closely related to unsteady flow behaviors in given blade passages in the rotating reference frame, which depend on the design specifics of axial machines. However, no efforts are made to set up a quantitative link between the time scale of unsteady behavior in a given passage and the characteristic parameters of RI, let alone to define the fluid dynamic processes/events which are causally linked with the RI inception. This is the motivation for the current investigations. In Part I, the experimental and numerical investigations are carried out to investigate tip flow unsteadiness in a subsonic axial compressor rotor. The measurement results show RI appears at operating points near the stability limit of the test rotor. It becomes more pronounced with mass flow rate decreased. The corresponding computational experiments show that flow unsteadiness in given passages also appears close to the stability limit with its initial origination confined to the tip region. The appearance of tip flow unsteadiness is accompanied by a phase lag pattern in different passages across the circumference similar to the detection of stall flutter. The well-developed Fourier-decomposed method is thus used to evaluate the mode characteristics of circumferential traveling waves. It turns out the circumferential traveling wave rotating against the rotor rotation direction with the mode order of 4 is prominent in the flow field with its frequency in the absolute frame equivalent to the mean frequency value of RI detected in measurements. The further analyses of the simulated flow fields indicate that tip flow unsteadiness in a given passage attributes to the periodic oscillation of “secondary clearance flow”, which induces a blockage tranfer across the passage. The mode order and propagation speed of RI depend on the blockage transfer induced by the periodic oscillation of “secondary clearance flow” between two neighbouring passages along the whole circumference. The investigation results presented in the paper implies that one of early ideas to interpret the origin of RI might be altered to such an extent that it contains any unsteady behavior associated with tip leakage flow, rather than limited to “periodical oscillation of tip leakage vortex”.

Stability Behaviour Of An Isotropic Rotor System Anisotropically Mounted And Partially Filled With Inviscous Fluid

Stability of a Rotor System on Support of Anisotropical Rigidity and Partially Filled with an Inviscid Fluid

Stability Analysis of Symmetrical Rotors Partially Filled with a Viscous Incompressible Fluid

Experimental Investigation into the Effect of Fluid Viscosity on Instability of an Over-Hung Flexible Rotor Partially Filled with Fluid

Instability of an Over-Hung Rigid Centrifuge Rotor Partially Filled with Fluid

DYNAMIC BEHAVIOUR OF A ROTOR PARTIALLY FILLED WITH FLUID IN THE UNSTABLE REGION

Experimental Study on Vibration and Stability of an Over-Hung Flexible Rotor Partially Filled with Two Kinds of Fluids

Effect of fluid viscosity on stability of a flexible rotor partially filled with fluid

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Experiment on Instability of Horizontal Rotor System Partially Filled with Small Amounts of Fluid

Vibration Attenuation Mechanism of the Rotor System with Anisotropic Support Stiffness

Experimental Detection of Rotating Instability and Exploration of Its Flow Mechanism in an Axial Flow Compressor Rotor

Stability of equilibrium of the body with filling

Origins and Structure of Rotating Instability: Part 1 — Experimental and Numerical Observations in a Subsonic Axial Compressor Rotor

An Analysis of the Stability of an Asymmetrical Rotor-bearing System

Stability analysis of a rotor system with electromechanically coupled boundary conditions under periodic axial load

Stability analysis of a rotor-bearing system with time-varying bearing stiffness due to finite number of balls and unbalanced force

Dynamic Instability of a Rotor-Bearing System with Two Asymmetric Disks

Stability Analysis for Reactor Coolant Pump with Vertical Rotor Supported by Fluid Film Bearings

Investigation on the Stability and Bifurcation of a 3D Rotor-Bearing System

Instability Region Classification and Control of Periodically Axially Loaded Rotor