Abstract:Rotating instability (RI) is an obvious unsteady flow phenomenon occurring in the tip region of compressors, which is potentially linked to tip clearance flow noise, blade vibration and rotating stall/surge. The existing investigations for RI indicate the origins of RI are closely related to unsteady flow behaviors in given blade passages in the rotating reference frame, which depend on the design specifics of axial machines. However, no efforts are made to set up a quantitative link between the time scale of unsteady behavior in a given passage and the characteristic parameters of RI, let alone to define the fluid dynamic processes/events which are causally linked with the RI inception. This is the motivation for the current investigations. In Part I, the experimental and numerical investigations are carried out to investigate tip flow unsteadiness in a subsonic axial compressor rotor. The measurement results show RI appears at operating points near the stability limit of the test rotor. It becomes more pronounced with mass flow rate decreased. The corresponding computational experiments show that flow unsteadiness in given passages also appears close to the stability limit with its initial origination confined to the tip region. The appearance of tip flow unsteadiness is accompanied by a phase lag pattern in different passages across the circumference similar to the detection of stall flutter. The well-developed Fourier-decomposed method is thus used to evaluate the mode characteristics of circumferential traveling waves. It turns out the circumferential traveling wave rotating against the rotor rotation direction with the mode order of 4 is prominent in the flow field with its frequency in the absolute frame equivalent to the mean frequency value of RI detected in measurements. The further analyses of the simulated flow fields indicate that tip flow unsteadiness in a given passage attributes to the periodic oscillation of “secondary clearance flow”, which induces a blockage tranfer across the passage. The mode order and propagation speed of RI depend on the blockage transfer induced by the periodic oscillation of “secondary clearance flow” between two neighbouring passages along the whole circumference. The investigation results presented in the paper implies that one of early ideas to interpret the origin of RI might be altered to such an extent that it contains any unsteady behavior associated with tip leakage flow, rather than limited to “periodical oscillation of tip leakage vortex”.

DYNAMIC BEHAVIOUR OF A ROTOR PARTIALLY FILLED WITH FLUID IN THE UNSTABLE REGION

Instability of an Over-Hung Rigid Centrifuge Rotor Partially Filled with Fluid

Experimental Investigation into the Effect of Fluid Viscosity on Instability of an Over-Hung Flexible Rotor Partially Filled with Fluid

Experimental Study on Vibration and Stability of an Over-Hung Flexible Rotor Partially Filled with Two Kinds of Fluids

Effect of fluid viscosity on stability of a flexible rotor partially filled with fluid

Stability Behaviour Of An Isotropic Rotor System Anisotropically Mounted And Partially Filled With Inviscous Fluid

Stability of a Rotor System on Support of Anisotropical Rigidity and Partially Filled with an Inviscid Fluid

Stability Analysis of Symmetrical Rotors Partially Filled with a Viscous Incompressible Fluid

Experiment on Instability of Horizontal Rotor System Partially Filled with Small Amounts of Fluid

Experimental Detection of Rotating Instability and Exploration of Its Flow Mechanism in an Axial Flow Compressor Rotor

The Tip Leakage Vortex Breakdown and its Possible Relationship With Rotating Instability in a Subsonic Compressor Rotor

Investigation of flow unsteadiness in a highly-loaded compressor cascade using a dynamic mode decomposition method

Origins and Structure of Rotating Instability: Part 1 — Experimental and Numerical Observations in a Subsonic Axial Compressor Rotor

Research On Circumferential Fluid Pressure Distribution And Whirl Stability Of Rotor-Bearing System

Experimental investigation into stability of rotor-sliding bearing systems

Dynamic modeling and analysis of Jeffcott rotor-annular flow coupled system

STUDY ON DYNAMIC CHARACTERISTICS OF WHIRLING ROTOR IMMERSED IN CONCENTRIC ANNULAR FLOW

Dynamic Behavior Analysis of a Rotor System Based on a Nonlinear Labyrinth-Seal Forces Model

Nonlinear Dynamic Analysis of a Rigid Rotor Supported By a Spiral-Grooved Opposed-Hemisphere Gas Bearing

Whirl dynamics of an axially functionally graded liquid-filled rotor considering shear deformation and rotary inertia

Dynamic Performance of a Rotor System with an Initial Bow and Coupling Faults of Imbalance-Rub During Whirling Motion