Abstract:We performed a combined experimental and theoretical investigation of the oxidation behavior of pure Ni and of the following multi-component Ni-containing alloys with nearly equiatomic compositions: FeNi, CoFeNi, CoCrFeNi, and CoCrFeMnNi. The materials were exposed to air at ambient pressure and at a temperature of 800°C for 150 minutes, their weight-gain due to oxidation was continuously monitored and the products of oxidation were subsequently characterized by XRD. The most common oxides formed have spinel or halite structure and the materials resistance to oxidation increases as: FeNi < CoFeNi < Ni < CoCrFeMnNi < CoCrFeNi. We found further that the oxidation-resistance of the materials does not correlate linearly with the number of elements present, instead the type of elements impacts significantly the materials susceptibility to oxidative damage. Cr is the element that imparted higher resistance to oxidation while Mn and Fe worsened the materials performance. In order to better understand the mechanisms of oxidation we employed thermodynamic equilibrium calculations and predicted the phase stability of oxides of the elements that are present in the materials, in different ranges of temperature, composition and oxygen activity. Additionally, we determined the phase compositions for the thermodynamically stable oxides at 800°C. The results from the thermodynamic modelling are in good agreement with the experimental finds. The alloys with low resistance to oxidation such as CoFeNi and FeNi, form the Fe3O4 spinel phase which tends to dominate the phase diagram for these materials. The presence of Cr increases the resistance to atomic rearrangement due to slow diffusion in the complex structure of Cr containing spinel phases. This causes the extremely high resistance to oxidation of the CoCrFeNi alloy. The presence of Mn in CoCrFeNi stabilizes the Mn3O4 spinel which reduces the oxidation-resistance of the alloys due to the high mobility of Mn.

Unraveling the role of tungsten as a minor alloying element in the oxidation NiCr alloys

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Chromium Depletion in a Ni-30Cr Alloy During High-Temperature Oxidation

Effect of Cr and W addition on the oxidation behavior of Ni–8%Al alloy at 1000 °C

High temperature oxidation behavior of a novel Ni-Cr-W-Al-Ti superalloy

High Temperature Oxidation Behavior of Ni-based High Entropy Superalloys

Effect of Cr on the Microstructure and Oxidation Properties of Co-Al-W Superalloys Studied by in Situ Environmental TEM

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

The Effect of Tungsten Additive on the Surface Characteristics of Amorphous Ni–P Alloy

Tuning Mo/W ratio to improve high temperature oxidation resistance of single crystal nickel base superalloys

Improvement of high-temperature oxidation resistance of WC–Co–Ni alloy by Cr3C2–CeO2–WS2 mixed additives and its mechanism

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

Microstructure and oxidation of NiCr alloys studied by analytical in situ environmental TEM

The synergy effect of elements on the oxidation resistance of a high-purity directionally solidification nickel-based superalloy

Nonlinear Oxidation Behavior in Pure Ni and Ni-Containing Entropic Alloys