Abstract:Compressor cascades with service inevitably suffer from blade fouling or erosion, which modifies blade geometries and brings sufficient damage to compressor performance. However, very few studies were cast upon the impact of degraded blade surface morphologies on the compressor aerodynamic performance. In this study, a novel geometry parameterization method is proposed to describe the non-uniform, multi-scale and stochastic geometric features of blade surface morphologies in fouling and erosion conditions. Through computational fluid dynamics (CFD) simulations, the influences of coverage, dirty size and density of dirty units on the cascade performance and flow field are numerically investigated. Finally, uncertainty analyses are conducted to quantify the cascade performance variations due to geometric uncertainties of dirty surface morphologies. To alleviate the computational load, a relatively new dimension reduction technique, i.e., the active subspace method is used to reduce the original eight-dimensional uncertainty quantification problem to a one-dimensional one. The CFD results show that at the high flow rate, the cascade performance is gradually worsened as the dirty surface morphology extends from the blade leading edge to the trailing edge on the suction surface. However, at the low flow rate, the cascade performance degradations tend to be alleviated once the dirty surface morphology enters the region of the separation bubble on the suction surface. At both operating points, the cascade total pressure loss almost increases monotonically with either larger or densified dirty units distributed on the blade suction surface. The probabilistic distributions from uncertainty analyses show that the cascade performance is more sensitive to the dirty surface morphology at low flow rates than at high flow rates. The present study can help understand the loss mechanisms within the 2D cascade in fouling and erosion conditions, which is beneficial for the enhancement of 3D compressor performance.

Research on the Influence of Surface Roughness on the Flow Field in the Cascade

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Experimental Research of Surface Roughness Effects on Highly-Loaded Compressor Cascade Aerodynamics

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Influence of Additional Leading-Edge Surface Roughness on Performances in Highly Loaded Compressor Cascade

Flow Analysis And Uncertainty Quantification Of A 2d Compressor Cascade With Dirty Blades

Direct Numerical Simulation of Boundary Layer Transition Induced by Roughness Element in a Low Reynolds Number Compressor Blade

Influence of Local Surface Roughness of Rotor Blade on Performance of an Axial Compressor Stage

A Roughness Prediction Method by Particle Deposition and Its Effect on Flow and Heat Transfer in High-Pressure Turbine Cascade

Study on the Influence of Surface Roughness on the Erosion Characteristics of Compressor Blades

Surface roughness effects in a transonic axial flow compressor operating at near-stall conditions

Numerical investigation of distributed roughness effects on separated flow transition over a highly loaded compressor blade

On the Effects of Surface Roughness on Boundary Layer Transition

Experimental Investigation on a High Subsonic Compressor Cascade Flow

Numerical and Experimental Study on Flow Loss Reduction Effect of Micro-Textured Surface on Compressor Cascade

Impact of the variation hi incidences on the diffusion factor of compressor cascades of different swept types

GPPS-TC-2024-0040 ON THE INFLUENCE OF NON-UNIFORM ROUGHNESS DISTRIBUTION IN A COMPRESSOR ROTOR ROW

Effect of Blade Sweeping-Curving on the Endwall Flow Field of Compressor Cascade

Numerical Simulation of Aerodynamic Performance of Film Cooling on A Flat Plate with Surface Roughness

Study on the Impact of Fouling on Axial Compressor Stage

Effects of surface roughness on the aerodynamic performance of a high subsonic compressor airfoil at low Reynolds number