Abstract:Degradation of compressors is a common concern for operators of gas turbine engines (GTEs). Surface roughness, due to erosion or fouling, is considered one of the major factors of the degradation phenomenon in compressors that can negatively affect the designed pressure rise, efficiency, and, therefore, the engine aero/thermodynamic performance. The understanding of the aerodynamic implications of varying the blade surface roughness plays a significant role in establishing the magnitude of performance degradation. The present work investigates the implications due to the degradation of the compressor caused by the operation in eroding environments on the gas turbine cycle performance linking, thereby, the compressor aerodynamics with a thermodynamic cycle. At the core of the present study is the numerical assessment of the effect of surface roughness on compressor performance employing the Computational Fluid Dynamics (CFD) tools. The research engine test case employed in the study comprised a fan, bypass, and two stages of the low pressure compressor (booster). Three operating conditions on the 100% speed-line, including the design point, were investigated. Five roughness cases, in addition to the smooth case, with equivalent sand-grain roughness (ks) of 15, 30, 45, 60, and 150 μm were simulated. Turbomatch the Cranfield in-house gas turbine performance simulation software, was employed to model the degraded engine performance. The study showed that the increase in the uniform roughness is associated with sizable drops in efficiency, booster pressure ratio (PR), non-dimensional mass flow (NDMF), and overall engine pressure ratio (EPR) together with rises in turbine entry temperature (TET) and specific fuel consumption (SFC). The performance degradation evaluation employed variables such as isentropic efficiency (ηis), low pressure compressor (LPC) PR, NDMF, TET, SFC, andEPR. The variation in these quantities showed, for the maximum blade surface degradation case, drops of 7.68%, 2.62% and 3.53%, rises of 1.14% and 0.69%, and a drop of 0.86%, respectively.

GPPS-TC-2024-0040 ON THE INFLUENCE OF NON-UNIFORM ROUGHNESS DISTRIBUTION IN A COMPRESSOR ROTOR ROW

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Statistical Evaluation of Performance Impact of Flow Variations for a Transonic Compressor Rotor Blade

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Performance Impact of Uncertain Variations of Inlet Flow for Axial Compressor Blades

Impact of Inlet Flow Angle Variation on the Performance of a Transonic Compressor Blade Using NIPC

Blade Roughness Effects on Compressor and Engine Performance—A CFD and Thermodynamic Study

Surface roughness effects in a transonic axial flow compressor operating at near-stall conditions

Experimental Evaluation of Compressor Blade Fouling

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Effects of blade surface roughness on compressor performance and tonal noise emission in a marine diesel engine turbocharger

Numerical investigation of distributed roughness effects on separated flow transition over a highly loaded compressor blade

Aerodynamical Performance Decay Due to Fouling and Erosion in Axial Compressor for GT Aeroengines

Quantitative Study on Equivalent Roughness Conversion Coefficient and Roughness Effect of Centrifugal Compressor

High-Fidelity Simulation Study of the Unsteady Flow Effects on High-Pressure Turbine Blade Performance

Experimental Analysis of the Time-Wise Compressor Fouling Phenomenon

Experimental Study on the Distribution Trends of Fouling on a Compressor Blade

Unsteady simulations of deposition in a rotor passage of the first-stage turbine for an aero-engine

Influence of Blade Tip Surface Roughness on the Performance of a Single-Stage Axial Flow Compressor

Film Cooling Performances Under Various Upstream Roughness Conditions: Experimental Investigations and Similarity Hypothesis