Abstract:Abstract Wire—electrical discharge machining (W-EDM) is a precise and efficient non-traditional technology employed to cut intricate shapes in conductive biomaterials. These biomaterials are challenging to machine using traditional methods. This present study delves into the impact of various process parameters, namely discharge duration (D dur ), spark gap time (S time ), discharge voltage (D volt ), and wire advance rate rate (W adv ). This research evaluates the impact of several factors on response variables, namely the machining rate (MR) and surface irregularity (SR), during the machining process of the AM60B magnesium alloy. The confirmation of the material used in the machining process is achieved via the utilisation of a scanning electron microscopy (SEM) image in conjunction with an energy dispersive spectroscopic (EDS) image. The experiment is designed as L9 orthogonal array by using Taguchi's approach, taking into account 4 factors with 3 levels. The objective of this experiment is to ascertain the most favourable values for machining parameters while working with AM60B magnesium alloy using brass wire. Through analysis of variance (ANOVA), the study confirms that wire advance rate (43.10%) is the most influencing parameter for machining rate and surface irregularity followed by spark gap time (33.91%) and discharge duration (11.48%). Additionally, The TOPSIS-CRITIC and the desirability approach were used in order to determine the optimum parameter combinations that provide the most favourable combined output. Confirmatory testing is used to evaluate the efficiency of the stated ideal conditions. The maximum improvement in Desirability approach is obtained at 4.56% and 4.193% for MR and SR respectively. The maximum improvement in TOPSIS approach is obtained at 1.77% and 2.78% for MR and SR respectively.

Investigations on the WEDM of Friction Stir Processed Magnesium/Graphene-Boron Nitride Hybrid Surface Composite through the Entropy-COPRAS Approach

Investigation of Machining Rate and Surface Roughness in Wire EDM of Al6063/WC/ZrO2 Composite using Response Surface Methodology

Experimental Investigations and Optimum Performance Evaluation of Wire-EDM Characteristics of Aluminium 6061-Magnesite Composites

Effect of Al7075 and Activated Carbon reinforced Composite on Optimizing WEDM Responses

Enhancing WEDM performance on Mg/FeCoCrNiMn HEA composites through ANN and entropy integrated COCOSO optimization

Experimental investigation to assess the surface integrity in WEDM of Al-based hybrid composite material

A Hybrid Design of Experiment Approach in Analyzing the Electrical Discharge Machining Influence on Stir Cast Al7075/B4C Metal Matrix Composites

Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing

Analysis of Wire-cut Electric Discharge Machining Behaviour of AA6061 / C / ZrO2 Hybrid Nano Composites using Taguchi's method

Electrical Discharge Machining of SiC Reinforced 6061-T6 Aluminum Alloy Surface Composite Fabricated by Friction Stir Processing

Optimization of magnesium ZK60A/SiC/B4C hybrid composite fabricated by friction stir processing

Wear and Mechanical Behaviour of Magnesium AZ31 alloy Reinforced with MoS2 through Friction Stir Processing for Aerospace Applications

Investigation on Mechanical and Fracture Behavior of Magnesium Composite Reinforced With Hybrid Fly Ash Particulates Synthesized via Friction Stir Processing Route

Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Experimental examination on electrochemical machining of Mg/FeCoCrNiMn composite

Metallurgical, mechanical and tribological behavior of Reinforced magnesium-based composite developed Via Friction stir processing

A study on die-sinking electrical discharge machining behaviour of friction stir processed AA5052/WS2 surface composite

Experimental and numerical investigation of multiwalled carbon nanotube/aluminosilicate reinforced aluminum hybrid surface composites using friction stir processing

Response Surface Modelling and Effective Application of Adaptive Neuro-Fuzzy Inference System to Analyze Surface Roughness of Al/Gr/Cp5 MMC Machined using WEDM

Parametric investigation of W-EDM factors for machining AM60B conductive biomaterial