Abstract:Purpose This paper aims to determine the optimum parametric settings for yielding superior mechanical properties, namely, ultimate tensile strength (UTS), yield strength (YS) and percentage elongation (EL) of AZ91D/AgNPs/TiO 2 hybrid composite fabricated by friction stir processing. Design/methodology/approach An empirical model has been developed to govern crucial influencing parameters, namely, rotation speed (RS), tool transverse speed (TS), number of passes (NPS) and reinforcement fraction (RF) or weight percentage. Box Behnken design (BBD) with four input parameters and three levels of each parameter was used to design the experimental work, and analysis of variance (ANOVA) was used to check the acceptability of the developed model. Desirability function analysis (DFA) for a multiresponse optimization approach is integrated with response surface methodology (RSM). The individual desirability index (IDI) was calculated for each response, and a composite desirability index (CDI) was obtained. The optimal parametric settings were determined based on maximum CDI values. A confirmation test is also performed to compare the actual and predicted values of responses. Findings The relationship between input parameters and output responses (UTS, YS, and EL) was investigated using the Box-Behnken design (BBD). Silver nanoparticles (AgNPs) and nano-sized titanium dioxide (TiO 2 ) enhanced the ultimate tensile strength and yield strength. It was observed that the inclusion of AgNPs led to an increase in ductility, while the increase in the weight fraction of TiO 2 resulted in a decrease in ductility. Practical implications AZ91D/AgNPs/TiO 2 hybrid composite finds enormous applications in biomedical implants, aerospace, sports and aerospace industries, especially where lightweight materials with high strength are critical. Originality/value In terms of optimum value through desirability, the experimental trials yield the following results: maximum value of UTS (318.369 MPa), maximum value of YS (200.120 MPa) and EL (7.610) at 1,021 rpm of RS, 70 mm/min of TS, 4 NPS and level 3 of RF.

Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing

Experimental and numerical investigation of multiwalled carbon nanotube/aluminosilicate reinforced aluminum hybrid surface composites using friction stir processing

Nanoarchitectonics of AA7075-NbC Surface Composites for Augmenting the Mechanical and Tribological Properties

Optimization of process parameters in fabricating AA6082 /Nip surface composite using friction stir processing technique

Multi-response optimization of input and output responses of multipass FSP of AA7050 with (SiC + TiB2) nanoparticles by response surface methodology

A study on microstructural, mechanical properties, and optimization of wear behaviour of friction stir processed AZ31/TiC composites using response surface methodology

Influence of processing variables on fabrication of AA7475/B4C/Al2O3 hybrid surface composites via FSP

Microstructural and sensor data analysis of friction stir processing in fabricating Al6061 surface composites

Friction Stir Processing of Aerospace Aluminum Alloy by Addition of Carbon Nano Tube

Optimization of Bobbin Tool Friction Stir Processing Parameters of AA1050 Using Response Surface Methodology

Optimization of Friction Stir Process Parameters for Micro-Hardness and Wear Characteristics of Silicon Carbide-Reinforced Al-7075 Surface Composite

Effects of friction stir processing parameters on the wear resistance and mechanical properties of fabricated metal matrix nanocomposites (MMNCs) surface

Metallurgical, mechanical and tribological behavior of Reinforced magnesium-based composite developed Via Friction stir processing

Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study

Implications of nanomaterials reinforcement along with sub-zero temperature cooling on microstructure and mechanical properties of friction stir processed Al7075 alloy

Friction Stir Processing of Al 2124 Reinforced Graphene Metal Matrix Composites and Multi Characteristic Optimization Through Desirability Approach Integrated with ANN

Microstructure and mechanical characteristics of Al1050/B2O3+Cu hybrid surface nanocomposite fabricated using friction stir processing

Comparative study of microstructural evolution and mechanical properties in friction stir processed, reinforced friction stir processed, and heat-treated reinforced friction stir processed Al composites

Influence of Tool Pin Profiles on Aluminium Alloy A356 and Ceramic-Based Nanocomposites for Light Weight Structures by Friction Stir Processing

Multiobjective optimization of process parameters of AZ91D/AgNPs/TiO 2 composite fabricated by friction stir processing using response surface methodology and desirability

Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing