Abstract:Inconel 625 superalloy is a versatile austenitic nickel-based superalloy with excellent strength and good ductility. It possesses excellent mechanical properties at both extremely low and extremely high temperatures with excellent resistance to pitting, crevice corrosion, cracking and crystalline corrosion. Inconel 625 superalloy is an important and frequently used material for an automobile, aerospace industries and marine application due to its excellent mechanical, chemical and physical properties. In the present research, empirical mathematical model for surface roughness and material removal rate (MRR) has been developed to study the influence of die-sinking electrical discharge machining (EDM) parameters, viz. peak current, pulse on time and pulse off time on Inconel 625. Central composite design is employed to plan experimental layout, and a quadratic model is adopted for empirical mathematical modeling. ANOVA is performed to test the adequacy of the model using <em class="EmphasisTypeItalic">F</em>-test and <em class="EmphasisTypeItalic">p</em>-test. Optimal setting of EDM parameters is obtained using composite desirability. ANOVA analysis reveals that peak current is the most dominating factor for MRR followed by pulse on time, while surface roughness is mostly influential by pulse on time followed by pulse off time. Surface roughness increases with the increase in pulse on time. MRR firstly increases with an increase in pulse on time and start decreasing after mid value (0), i.e., 15 µs whereas surface roughness continuously increases with an increase in pulse on time. Optimal setting of EDM parameters is obtained by composite desirability function. The goal is to minimize surface roughness and maximize MRR simultaneously. Results are validated by the confirmation experiment using the optimal set of EDM parameters. The confirmation experiments reveal that the experimental and predicted results are very close with error amounting of 2.19% and 2.58% for MRR and surface roughness respectively.

Response Surface Modelling and Effective Application of Adaptive Neuro-Fuzzy Inference System to Analyze Surface Roughness of Al/Gr/Cp5 MMC Machined using WEDM

Investigation of Machining Rate and Surface Roughness in Wire EDM of Al6063/WC/ZrO2 Composite using Response Surface Methodology

Experimental investigation to assess the surface integrity in WEDM of Al-based hybrid composite material

Effect of Al7075 and Activated Carbon reinforced Composite on Optimizing WEDM Responses

Investigations on machinability characteristics of Cast Aluminum Alloy based (LM 26+Graphite+Fly ash) Hybrid Metal Matrix Composites for automobile components

Experimental investigation, modeling and optimization of wire EDM process parameters for machining AA2024-B4C self-lubricating composite

Predictive modelling and optimization of WEDM parameter for Mg-Li alloy using ANN integrated CRITIC-WASPAS approach

A Machine Learning Perspective to the Investigation of Surface Integrity of Al/SiC/Gr Composite on EDM

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Optimization and Analysis for Surface Roughness of SiCp/Al Metal Matrix Composite by Micro-WEDM

Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Performance of Wire Electrical Discharge Machining of Inconel 718 Alloy

Machining characteristics and optimization of process parameters in die-sinking EDM of Inconel 625

Investigation of aluminum alloy 6061 in Wire-EDM regarding surface roughness and material removal rate by adopting optimization techniques

WEDM of Al/SiC/Ti composite: A Hybrid Approach of RSM-ARAS-TLBO Algorithm

Taguchi optimization of Wire EDM process parameters for machining LM5 aluminium alloy

Multi-Objective Optimization of Machining Parameters on Aluminium Alloy Metal Matrix Composites using Response Surface Methodology

Use of RSM Desirability Approach to Optimize WEDM of Mild Steel

Modeling and optimization of WEDM of monel 400 alloy using ANFIS and snake optimizer: A comparative study

Wire Electric Discharge Machining of Aluminium Hybrid Composite: Renewable Energy Based IoT Approach

Optimization of the Material Removal Rate and Electrode Wear Ratio in Electrical Discharge Machining of Reaction-bonded Silicon Carbide by Response Surface Methodology

Enhancing WEDM performance on Mg/FeCoCrNiMn HEA composites through ANN and entropy integrated COCOSO optimization