Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Comparative tribological performance and erosion resistance of epoxy resin composite coatings reinforced with aramid fiber and carbon fiber

Constructing Ti3C2Tx/Carbon fiber hybrids for enhancing the interfacial strength and erosion wear resistance of EP-based composite coating

Mechanical and tribological properties of silicon carbide /carbon fiber/epoxy resin based composites

Friction and Wear Behaviors of Surface-Modified Carbon Fabric/Epoxy Resin Composites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Heterostructured three-dimension MXene/short carbon fiber to enhance thermal, mechanical and tribological properties of epoxy composites

Epoxy Enhanced by Recycled Milled Carbon Fibres in Adhesively-Bonded CFRP for Structural Strengthening

Tribological Behavior of Chemically Bonded Ceramic Coatings Reinforced with Modified Carbon Fiber

Improving Interfacial Compatibility by a Micro–nano Synergetic Structure for High‐performance Epoxy Composites

Constructing bi-functional Ce-MOF on carbon fiber endowing epoxy coating with excellent anti-corrosion and erosion wear resistance

Study on the Properties and Mechanism of m‐FACs/f‐Fe3O4/Epoxy Wear‐Resistant Magnetic Coating

Tribological Properties of EP Composites Reinforced with Short Glass Fiber, Graphite, PTFE and B4C Under Oil Lubrication

Tribological characteristics of carbon fibre reinforced epoxy composite filled with ceramic particles: influence of multi-walled carbon nanotubes

Friction and Wear Performance of Staple Carbon Fabric-Reinforced Composites: Effects of Surface Topography

DRY SLIDING FRICTION and WEAR PROPERTIES of CACO3 NANOPARTICLE FILLED EPOXY/CARBON FIBER COMPOSITES

Friction and wear characteristics of Furcraea foetida fiber‐reinforced epoxy composites

Development of silane-treated corn husk fiber and agro-waste biofiller-reinforced epoxy composite: effects on wear, mechanical, thermal, and water absorption properties

Construction of "organic–inorganic" hierarchical structure of carbon fibers and the effect on the properties of epoxy composites

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Investigation of the thermal and tribological properties of epoxy composite reinforced with aramid nanofiber/OMMT hybrid aerogel