Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Heterostructured three-dimension MXene/short carbon fiber to enhance thermal, mechanical and tribological properties of epoxy composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Fabrication of RGO/CNTs/MXene 3D skeleton structure for enhancing thermal and tribological properties of epoxy composites

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Epoxy composites with functionalized molybdenum disulfide nanoplatelet additives

Three‐dimensional structured MXene / SiO 2 for improving the interfacial properties of composites by self‐assembly strategy

Covalently grafting silane coupling agents onto MXene‐reinforced carbon fibers for epoxy composites with improved mechanical properties

Well-aligned MXene@MoS 2 /Carbon nanofiber aerogels reinforced epoxy composites with splendid thermal and tribological performance

Significance of constructed MXene@Ag hybrids for enhancing the mechanical and tribological performance of epoxy composites

Improving Interfacial Compatibility by a Micro–nano Synergetic Structure for High‐performance Epoxy Composites

Investigation of mechanical properties and thermal expansion coefficient of epoxy composites modified with MXene nanofluids

Preparation and mechanical performances of carbon fiber reinforced epoxy composites by Mxene nanosheets coating

MXene modified carbon fiber composites with improved mechanical properties based on electrophoretic deposition

Construction of "organic–inorganic" hierarchical structure of carbon fibers and the effect on the properties of epoxy composites

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Construction of 3D structured MXene-h-BN hybrid via thiol-ene click chemistry to enhance thermal and tribological properties of fabric composites

Functionalized carbon fibers with MXene via electrochemistry aryl diazonium salt reaction to improve the interfacial properties of carbon fiber/epoxy composites

Comparative tribological performance and erosion resistance of epoxy resin composite coatings reinforced with aramid fiber and carbon fiber

Constructing Ti3C2Tx/Carbon fiber hybrids for enhancing the interfacial strength and erosion wear resistance of EP-based composite coating

Investigation of the thermal and tribological properties of epoxy composite reinforced with aramid nanofiber/OMMT hybrid aerogel