Abstract:Anti‐friction mechanism diagram of the composites under different lubrication conditions. The functional group in the molecular chain of lubricants is a key factor for a boundary lubricating film, which can further enhance the friction performance by interfacial tribochemistry. In this paper, the tribological behavior of epoxy/graphene (EP/Gra) composites was investigated through varying lubrication conditions, including dry friction, or different lubricants (such as water, hexadecane, oleylamine, and oleic acid). The porosity and Shore hardness (SHD) of the EP composites were significantly improved by the addition of graphene. Results showed that the porosity of the EP/0.75 wt.% Gra composites was reduced by 75.6% and their SHD increased by 5.4 compared with the EP/0.05 wt.% Gra composites. The average coefficient of friction (COF) of the composites was reduced by at least 27.3% under dry friction conditions. For water as lubricant, the EP/0.5 wt.% Gra composite exhibited the lowest COF (0.0455). The EP/0.75 wt.% Gra composite displayed the lowest COF (0.0466) when hexadecane acted as lubricant. By contrast, EP/0.05 wt.% Gra showed the lowest COF (0.0389) with oleylamine as lubricant, and the EP/0.25 wt.% Gra composites gave the lowest COF (0.0433) under oleic acid. The amine group of oleylamine reacted with the EP group to form a hydroxyl group, resulting in a polymer with low friction adhered to the friction interface. Simultaneously, the EP group reacted with the carboxyl group, forming a network of hydrogen bonds with graphene, which reduced the shear stress on the friction interface. Therefore, the functional groups of lubricants have a vital influence on the tribological properties of frictional composites, which may provide a new approach to solving the problem of wear.

Tribological Properties of EP Composites Reinforced with Short Glass Fiber, Graphite, PTFE and B4C Under Oil Lubrication

Tribological performance of epoxy composites reinforced by 3D expanded graphite skeleton containing oil microcapsules

Experimental investigation on triglycidyl isocyanurate‐based tribologically functional composites

Investigation of Tribological Properties of PI/FEP Laminated Composites Under Dry Sliding, Water- and Oil-Lubricated Conditions

Tribological Properties of Short Carbon Fibers Reinforced Epoxy Composites

Enhancement of the Water-Lubricated Tribological Properties of Hybrid PTFE/Nomex Fabric Laminate Composite via Epoxy Resin and Graphite Filler

Tribological Properties of Polytetrafluoroethylene-based Composites Filled with Graphite

Influence of Solid Lubricant Reinforcement on Wear Behavior of Kevlar Fabric Composites

Effect of lubricant functional groups on tribological properties of epoxy/graphene composites

Influences of Carbon Fabric/epoxy Composites Fabrication Process on Its Friction and Wear Properties

Influence of Polyethyleneimine Functionalized Graphene on Tribological Behavior of Epoxy Composite

Study on tribological properties of epoxy resin composites

Tribological Properties of Epoxy Composite Coatings Reinforced with Functionalized C-BN and H-BN Nanofillers

Enhancement of Underwater Tribological Properties of Hybrid PTFE/Nomex Fabric/Epoxy Resin Multilayer Composites by Mixed Graphite and MoS2 Fillers

Preparation and tribological properties of self‐lubricating epoxy resin composites with oil‐containing carbon‐based nanocapsules

The Tribological Properties of Kevlar Pulp Reinforced Epoxy Composites under Dry Sliding and Water Lubricated Condition

Tribological Behaviour of Polymeric Coatings. Part I. Aramid Particle-Reinforced Epoxy Nanocomposite Systems

Development of Tribologically Optimized Surface Coatings with Micro and Nano Particles

Friction and Wear Behaviors of Ptfe Composites Reinforced with Different Fillers

Tribological Properties of Polytetrafluoroethylene Composites Filled with Rare Earths Modified Glass Fibers