Abstract:Particle reinforced metal matrix composites (PR-MMCs) have attracted extensive investigation in material science and engineering. They combine both strength and toughness and show excellent properties such as good wear resistance, corrosion resistance and high temperature properties. Laser depositing of metal matrix composite coatings containing in-situ carbide particles is a research focus in laser surface processing. The essential advantage of the in-situ synthesis technology is that the reinforcements are much more compatible with the matrix and the interface between the reinforcements and the matrix is much cleaner. It has a special advantage in high distribution density and dimension uniformity to in-situ synthesize particles by laser melting precursor powders containing several strong carbide-forming elements (SCFEs) rather than one. Each SCFE has significant effects on the precipitation and distribution of the carbide particles. To investigate the microstructure and properties of the cladded layers, in this paper, the coatings were produced by laser cladding powders containing 2%Ti, 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC (mass fraction) respectively on the surface of a medium carbon steel. The microstructure of the coatings and the carbide particles were studied by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the microstructure of the coatings is typically hypo-eutectic. The in-situ particles have a TiC structure with high content of Zr or W when 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC are added into the cladded powders. Therefore, they are multiple carbides. The interface between the particle and the base material is strong. The optimized distribution of the particles with high distribution density (2x10(4) mm(-2)) and high dimension uniformity (about 1 mu m) are obtained when 1%Ti+1%Zr+10%WC are added. The wear resistance of the coating was tested through ring-on-block wear experiment. It is indicated that laser cladding Fe-based composite coating reinforced by in-situ multiple carbide particles presents excellent wear resistance.

Study on the Properties and Mechanism of m‐FACs/f‐Fe3O4/Epoxy Wear‐Resistant Magnetic Coating

Wear-Resistant and Electromagnetic Absorbing Behaviors of Oleic Acid Post-Modified Ferrite-Filled Epoxy Resin Composite Coating

Constructing Ti3C2Tx/Carbon fiber hybrids for enhancing the interfacial strength and erosion wear resistance of EP-based composite coating

Comparative tribological performance and erosion resistance of epoxy resin composite coatings reinforced with aramid fiber and carbon fiber

Mechanical, Bonding and Tribological Performances of Epoxy‐based Nanocomposite Coatings with Multiple Fillers

Study on Fabrication of Superhydrophobic and Superparamagnetic Functional Coatings and Its Properties

Friction Behaviors and Wear Mechanisms of Multi-Filler Reinforced Epoxy Composites under Dry and Wet Conditions: Effects of Loads, Sliding Speeds, Temperatures, Water Lubrication

Effect of Electromagnetic Stirring on the Microstructure and Wear Behavior of Iron-Based Composite Coatings

A novel organic-inorganic two-dimensional filler for composite coating with excellent mechanical and high-pressure CO 2 anti-corrosion performance

Fabrication of Epoxy Composite Coatings with Micro-Nano Structure for Corrosion Resistance of Sintered NdFeB

Synergistic mechanism of the fretting wear resistance of Fe2O3/Ag nanostructured coatings prepared by sliding friction and magnetron sputtering

Magnetic Performance of Fe 3 O 4 /epoxy Nanocomposites

Study of Friction and Wear Behaviors of Fe-based Amorphous Coatings by MD Simulations

A dense structure constructed by flake and spherical aluminum: Simultaneously enhanced anti‐wear and anti‐corrosion properties of epoxy/polytetrafluoroethylene composite coatings

Mechanochemical Effect of Filler Surface Functionality on Fluoropolymer Tribology

STUDY ON WEAR RESISTANCE OF LASER CALDDING Fe-BASED COMPOSITE COATINGS REINFORCED BY IN-SITU MULTIPLE CARBIDE PARTICLES

Tribological properties and corrosion resistance of epoxy resin‐polytetrafluoroethylene bonded solid lubricating coating filled with flake aluminum

Preparation and Tribological Properties of MXene-Based Composite Films

Tribological behaviors of graphite/epoxy two-phase composite coatings

Improved Interfacial Properties of Carbon Fiber-Reinforced Epoxy Composites with Fe2O3/graphene Nanosheets Using a Magnetic Field

Preparation and Performance Study of Nano-Ti-MWCNT Hybrid Filler Reinforced Epoxy Resin Composite Coating