Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

Development of a Damage Mechanics Model for Fatigue Life Prediction of 2.5D Woven Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

A Continuum Damage Model for Three-Dimensional Woven Composites and Finite Element Implementation

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

A damage model for matrix cracks in composite laminates under fatigue loading based on continuum damage mechanics

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

A Continuum Damage and Discrete Crack Module for Fatigue Damage Prediction of Laminated Composite Structures

Multiscale Progressive Damage Model for Plain Woven Composites

A Coupled Elastoplastic-Damage Analytical Model for 3D Resin-Matrix Woven Composites

Finite Element Method of a Progressive Intralaminar and Interlaminar Damage Model for Woven Fibre Laminated Composites under Low Velocity Impact

Micromechanics-based Multiscale Progressive Failure Simulation of 3D Woven Composites under Compressive Loading with Minimal Material Parameters

Fatigue life prediction method for notched 3D woven composites based on progressive damage and field intensity

Damage Behavior and Life Prediction Model of Composite Laminates under Combined High and Low Cycle Fatigue

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

A Progressive Damage Model for 3D Woven Composites Integrating Kinking-Buckling Competition

A Coupled Elastic-Plastic Damage Model for the Mechanical Behavior of Three-Dimensional (3D) Braided Composites

Random Fatigue Damage Accumulation Analysis of Composite Thin-Wall Structures Based on Residual Stiffness Method

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis