Abstract:Accurately assessing the fatigue performance of components is the key to ensuring structural integrity and reliability, but there is a lack of fatigue life prediction methods that effectively couple the stress gradient effect, the non-proportional additional strengthening effect, and the size effect. Accordingly, a fatigue life prediction model for notched specimens under multiaxial loading is established by analyzing the influence of tension–torsion proportional load and tension–torsion non-proportional load on the fatigue strength of notched specimens. Firstly, based on the energy critical plane method, the location of the critical plane is determined with the help of the coordinate transformation principle. Secondly, the material constant is used to quantify the level of cyclic strengthening, and a non-proportional additional strengthening function is proposed by considering the influence of phase difference. Thirdly, the influence of the non-uniform stress field at the notch root on the fatigue life is considered, and the distribution of equivalent stress on the specific paths is extracted and normalized to give an equivalent stress gradient factor. Then, a fatigue strength reduction factor is constructed by considering the influence of different notch geometrical parameters. Finally, a fatigue life assessment method for notched specimens is proposed based on the Manson–Coffin equation. With the help of the test data of three materials, En8, Al7050-T7451, and GH4169, the method is validated and compared with the calculation results of the Manson–Coffin equation, SWT model, and FS model. The results show that the prediction accuracy of the method in this study is high, which is located in the two-fold error dispersion band, and the prediction results are better than that of the other three models.

Fatigue life prediction method for notched 3D woven composites based on progressive damage and field intensity

Progressive failure analysis of 2D woven composites at the meso-micro scale

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Progressive damage modelling and fatigue life prediction of Plain-weave composite laminates with Low-velocity impact damage

Fatigue life prediction method of carbon fiber-reinforced composites

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Strength and stiffness degradation modeling and fatigue life prediction of composite materials based on a unified fatigue damage model

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Development of a Damage Mechanics Model for Fatigue Life Prediction of 2.5D Woven Composites

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

A novel mesoscopic progressive damage model for 3D angle-interlock woven composites

Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

Fatigue life evaluation of notched components affected by multiple factors

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

A new time-frequency domain simulation method for damage accumulation and life prediction of composite thin-wall structures under random cyclic loadings

Fatigue life prediction of composite suspension considering residual stress and crack propagation

Fatigue failure mechanism analysis and life prediction of short fiber reinforced polymer composites under tension-tension loading

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

Fatigue Life Prediction of Composite Laminate Based on Stress of Fiber and Matrix of UD Composite