Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

Effect of Acidic Hydrochar on Plastic Crude oil Produced from Hydrothermal Liquefaction of Waste PVC

Acidic process fluid from hydrothermal carbonization improves dechlorination of waste PVC and produces clean solid and liquid fuels

Sequential hydrothermal dechlorination and liquefaction of PVC

Hydrothermal liquefaction of diverse plastics using water and seawater

Hydrothermal Liquefaction of Plastics: a survey of the effect of reaction conditions on the reaction efficiency.

Hydrothermal Oxidation of Polyethylene (PE) Plastic to Short-chain Fatty Acids (C1 - C5)

Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons

Hydrothermal dechlorination strategy for high-quality oil recovery from polyvinyl chloride

The Influence of PVC on the Coprocessing of Coal and Plastics

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Co-hydrothermal dechlorination of PVC plastic and bagasse: Hydrochar combustion characteristics and gas emission behavior

Insights into PVC-promoted hydrothermal carbonization of manure: Dechlorination, inorganic metals removal, and combustion behaviors

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

Experimental Investigation on Liquefaction of Plastic Waste to Oil in Supercritical Water.

Catalytic conversion of waste plastics: focus on waste PVC

Investigation of the uptake and catalytic effect of calcium and potassium‐based additives under low‐temperature pyrolysis of polyvinyl chloride

Comparative Study of Hydrogen Thermal Decompostion Characteristics According to Space Velocity Using Combustible Waste Plastics

The Effect of Utilizing Homogeneous Conversion to Control the Formation of Chlorinated Hydrocarbons During PVC Pyrolysis

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Effect of Hydrothermal Process on the Pyrolysis of Oily Sludge: Characterization and Analysis of Pyrolysis Products

Effect of Interaction Between Different Plastics and Polyvinyl Chloride on the Chlorine Transformation Behavior in Volatiles During Low-Temperature Pyrolysis