Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

Hydrothermal dechlorination strategy for high-quality oil recovery from polyvinyl chloride

Sequential hydrothermal dechlorination and liquefaction of PVC

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Acidic process fluid from hydrothermal carbonization improves dechlorination of waste PVC and produces clean solid and liquid fuels

Catalytic stepwise pyrolysis for dechlorination and chemical recycling of PVC-containing mixed plastic wastes: Influence of temperature, heating rate, and catalyst

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Dechlorination of fuels in pyrolysis of PVC containing plastic wastes

Co-hydrothermal dechlorination of PVC plastic and bagasse: Hydrochar combustion characteristics and gas emission behavior

Catalytic conversion of waste plastics: focus on waste PVC

A low-temperature co-treatment of diethylhexyl phthalate-rich polyvinyl chloride and waste copper catalyst by subcritical water (hydrothermal treatment): Dechlorination, recovery of diethylhexyl phthalate and copper

Low chlorine oil production through fast pyrolysis of mixed plastics combined with hydrothermal dechlorination pretreatment

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

Low-temperature dechlorination of polyvinyl chloride (PVC) for production of H 2 and carbon materials using liquid metal catalysts

Catalytic tandem dehydrochlorination–hydrogenation of PVC towards valorisation of chlorinated plastic waste

Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate

Hybridization of the thermo-chemical process of polyvinyl chloride in the production of bioethanol using horse hay

Dechlorination of polyvinyl chloride by hydrothermal treatment with cupric ion

Fate of sodium and chlorine during the co-hydrothermal carbonization of high-alkali coal and polyvinyl chloride

Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons

Separate two-step and continuous two-stage pyrolysis of a waste plastic mixture to produce a chlorine-depleted oil