Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

The Influence of PVC on the Coprocessing of Coal and Plastics

A comprehensive understanding of the synergistic effect during co-pyrolysis of polyvinyl chloride (PVC) and coal

Investigation on Synergistic Effects and Char Morphology During Co-pyrolysis of Poly(vinyl Chloride) Blended with Different Rank Coals from Northern China

Pyrolysis Characteristics of Hailar Lignite in the Presence of Polyvinyl Chloride: Products Distribution and Chlorine Migration

Fate of sodium and chlorine during the co-hydrothermal carbonization of high-alkali coal and polyvinyl chloride

The Effect of Utilizing Homogeneous Conversion to Control the Formation of Chlorinated Hydrocarbons During PVC Pyrolysis

Effect of Acidic Hydrochar on Plastic Crude oil Produced from Hydrothermal Liquefaction of Waste PVC

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Co -hydrothermal carbonization of polyvinyl chloride and lignocellulose biomasses: Influence of biomass feedstock on fuel properties and combustion behaviors

Investigation of the uptake and catalytic effect of calcium and potassium‐based additives under low‐temperature pyrolysis of polyvinyl chloride

Synergistic Effect and Chlorine-Release Behaviors During Co-pyrolysis of LLDPE, PP, and PVC

Synergetic analysis between polyvinyl chloride (PVC) and coal in chemical looping combustion (CLC)

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

Kinetic Analysis of the Pyrolysis of Hydrochar Derived from PVC and Its Thermochemical Behaviors in a Blast Furnace

Interpretation of interactions between low rank coal and Polyethylene during co-pyrolysis from the bond cleavage perspective

Physico-Chemical Structure and Gasification Performance of Co-Pyrolytic Char Produced by the Pyrolysis of Polyvinyl Chloride Blends with Two Rank Coals

Catalytic conversion of waste plastics: focus on waste PVC

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons

Sequential hydrothermal dechlorination and liquefaction of PVC

Insights into PVC-promoted hydrothermal carbonization of manure: Dechlorination, inorganic metals removal, and combustion behaviors