Abstract:Coal liquefaction residues have been used to prepare microporous and mesoporous carbons. Although these carbon materials have abundant pore sizes, their mechanical strength is poor, but cannot meet the demand for metallurgical coke in the industrial field. Based on the above-mentioned defects of carbon materials, a new method was proposed to prepare high-density carbon materials by in-situ addition of furfural in coal liquefaction residues at 450°C by inducing polycondensation. In order to study the influence of minerals and sulfur content in the coal liquefaction residue on the density of the induced polycondensation carbon material, it is proposed to firstly remove the ash and sulfur content of the coal liquefaction residue by hydrochloric acid and hydrofluoric acid, and then the changes of density and structure of carbon materials prepared by induced polycondensation were studied. The results showed that the treatments of HCl and HF have little effect on the pyrolysis of coal liquefaction residues, but only slightly shift the maximum pyrolysis rate temperature to the high temperature section. The 28.96%, 65.33% of ash and 2.42%, 46.06% of sulfur content in the coal liquefaction residue can be removed by the HCl and HF, respectively, but have little effect on the contained organic matter. The mass of organic components of YH-polymer, YH-HCl-polymer and YH-HF-polymer in N-methylpyrrolidone solvent decreased by 10.3%, 2.0% and 5.0%, respectively, indicating that the deashing treatment of coal liquefaction residues can further improve the polymerization degree of condensation. The removal of minerals can further promote the increase of thermal stability and disorder of the polymer, and the microcrystalline structure of the obtained product after further carbonization is regular and tends to graphitize. The density and sulfur content (0.81%) of the carbon materials produced by HF removing ash in coal liquefaction residue have reached the metallurgical coke standard.

Effects of Direct Coal Liquefaction Residue Additions on Low-Rank Pulverized Coal during Co-Pyrolysis

Co-pyrolysis characteristics and synergistic mechanism of low-rank coal and direct liquefaction residue

Effect of Extracted Compositions of Liquefaction Residue on the Structure and Properties of the Formed-coke

Co-Pyrolysis Characteristics of Coal and Sludge Blends Using Thermogravimetric Analysis

Product Characteristics and Interaction Mechanism in Low-Rank Coal and Coking Coal Co-Pyrolysis Process

Microwave co-pyrolysis of lignite with direct coal liquefaction residue: Synergistic effects and product combustion characteristics

Properties of semi-coke from co-pyrolysis of lignite and direct liquefaction residue of Shendong coal

A comprehensive understanding of the synergistic effect during co-pyrolysis of polyvinyl chloride (PVC) and coal

Study on interaction and mechanisms of direct coal liquefaction residue and gas coal in coal blending during coking

Co-pyrolysis characteristics and kinetics of low metamorphic coal and pine sawdust

Process study and CO2 emission reduction analysis of coal liquefaction residue fluidized bed pyrolysis

Interpretation of interactions between low rank coal and Polyethylene during co-pyrolysis from the bond cleavage perspective

Analysis of tar and pyrolysis gas from low-rank coal pyrolysis assisted by apple branch

Insight into hydrogen migration and redistribution characteristics during co-pyrolysis of coal and polystyrene

Synergistic effect of Hami coal and polystyrene on products properties during co-pyrolysis: Evaluation on the contribution of different interaction sources

Study on oxygen species in the products of co-liquefaction of coal and petroleum residues

Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 3: Modifying non-coking coal tar through co-pyrolysis of coal with linear low-density polyethylene and high-impact polystyrene

Experimental study on co-pyrolysis of petroleum coke and coals: Synergy effects and co-gasification reactivity

Thermal Behavior and Gas Evolution Characteristics During Co-Pyrolysis of Lignocellulosic Biomass and Coal: A TG-FTIR Investigation

Study on the effect of ash in coal liquefaction residue on the preparation of high-density carbon materials by induced polycondensation

Insight into the influence of calcium on the co-pyrolysis of coal and polystyrene