Abstract:Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Ahead of Print. Due to the deep stage of oxygen, the pulverized coal cannot be burned completely in the primary combustion zone, resulting in a high content of residual carbon. The residual carbon in ash has a potential effect on the melting characteristics of ash, while there is a lack of specific research on the effects of residual carbon on ash fusion characteristics of high-alkali coals. In the present study, synthetic ash was blended with residual carbon to study the impacts of residual carbon content, graphitization level of the carbon, and atmospheric condition on ash fusion characteristics. Thermogravimetric analyzers and ash melting point testers were used to study the thermogravimetric behavior of ash and the characteristic temperatures of ash fusion, and then analyze the changes in the mineral composition and micromorphology of slag using X-ray diffractometers and scanning electron microscopy. The experimental results reveal that the change in residual char content exerts a minor influence on the type of crystalline minerals within the ash, while it affects the relative content of various minerals. The softening temperature of the ash blended with activated carbon and graphite are 1234°C and 1242°C, respectively. The blending of activated carbon greatly promotes the generation of gehlenite (Ca2Al2SiO7, 1593°C) and inhibits the generation of merwinite (Ca3MgSi2O8, 1550°C), increasing the ash melting temperature. The ash fusion characteristic temperatures of the pure synthetic ash decrease with the enhancement of the reductive atmosphere. However, the ash fusion characteristic temperatures of the ash blended with carbon in strong reducing atmosphere are increased compared to those in weak reducing atmosphere because part of the carbon acts as a skeleton or reacts to form a carbon-silicon compound. The present study can offer improved knowledge to provide fundamental support for the combustion and utilization of high-alkali Zhundong coal under deep oxygen-staged conditions.

Study on the effect of ash in coal liquefaction residue on the preparation of high-density carbon materials by induced polycondensation

Effects of Direct Coal Liquefaction Residue Additions on Low-Rank Pulverized Coal during Co-Pyrolysis

Investigation on Effect of Coal Fly Ash on Properties of Corn Straw Pyrolysis Products

Effect of Extracted Compositions of Liquefaction Residue on the Structure and Properties of the Formed-coke

Direct Liquefaction Performance of Sub-Bituminous Coal from Hefeng by Solid Super Acids and Pyrolysis Kinetic Analysis of the Corresponding Residue

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

Investigation on coal ash fusibility and fluidity during the co-gasification of coal and coal indirect liquefaction residue

Effect of Pretreatment Synergistics on Shenfu Low-rank Coal Pyrolysis in Molten Metal

Co-pyrolysis characteristics and synergistic mechanism of low-rank coal and direct liquefaction residue

Decarburization and ash characteristics during melting combustion of fine ash from entrained-flow gasifier

Experimental study on the effects of residual carbon on ash fusion characteristics of high-alkali Zhundong coal under deep oxygen-staged condition

Process study and CO2 emission reduction analysis of coal liquefaction residue fluidized bed pyrolysis

Combined effect of coal chemical wastewater and PC on preparing of coal-to-liquids residue-based alkali activated materials

Synthesis of an industrial by-product-based polymeric additive for use with non-coking coal in metallurgical coke making and a combined density functional theory assessment of its molecular mechanism in fluidity development

Changes in structure of coal liquefied pitch during liquid-phase carbonization process

Study on the interaction and coking characteristics of low-sulfur meager coal and medium-high sulfur fat coal during co-carbonization process

Insight into impact of co-pyrolysis process parameters on cross-interaction of volatiles between furfural residue and coal via rapid infrared heating

Pyrolytic Modification of Heavy Coal Tar by Multi-Polymer Blending: Preparation of Ordered Carbonaceous Mesophase

Effect of Ash and Dolomite on the Migration of Sulfur from Coal Pyrolysis Volatiles

Effect of ash on dielectric properties and micro-structure of high alkali coal at different temperature pyrolysis

Development of a Novel Mild Depolymerization Method of Coal by Combining Oxygen Oxidation and Formic Acid Reduction Reactions