Abstract:Total hydrogenation of hydroxymethylfurfural (HMF) (including hydrogenation of both furan ring and carbonyl group) produces 2,5-bis-(hydroxymethyl) tetrahydrofuran (BHTF), which can be used as rigid polymer monomer, green solvent, or precursor of high-value chemicals and has great market potential. Although Ni is regarded as the most selective metal for the total hydrogenation of HMF, Ni catalysts often suffer sintering and leaching under hydrothermal conditions. In this regard, development of hydrothermally stable Ni catalysts is highly desirable. Here, Ni on well mixed oxides (Ni/MgaAl10-aOx) derived from layered double hydroxide (LDH) precursors was successfully synthesized via co-precipitation. The Ni/MgaAl10-aOx showed superior hydrothermal stability during the aqueous phase total hydrogenation of HMF, without noticeable activity loss, leaching and sintering after multiple reuse. In contrast, significant activity loss, leaching and sintering was observed for impregnated Ni counterparts. Catalyst characterization revealed the formation of highly dispersed Ni and well mixed porous oxides after the thermal reduction of the NiMgAl-LDH precursors as well as the stronger metalsupport interactions of the NiMgAl-LDH as compared to impregnated Ni catalysts with similar Ni particle size. The markedly improved hydrothermal stability was due to enhanced metal support interactions derived from the LDH precursors, which prevents the undesired agglomeration and leaching of Ni in the hydrothermal environment. Moreover, a high BTHF yield of 99.0% was obtained using the Ni/MgaAl10-aOx under optimal reaction conditions. Density functional theory calculations suggest that the total hydrogenation of HMF over the Ni catalysts proceeds through the alkoxy pathway via "flat-lying" adsorption.

Spillover Hydrogen on Electron-Rich Ni/m-TiO2 for Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Total Hydrogenation of Furfural under Mild Conditions over a Durable Ni/TiO2–SiO2 Catalyst with Amorphous TiO2 Species

Improving Furfural Hydrogenation Selectivity by Enhanced Ni-TiO2 Electronic Interaction

Nickel - Titania Supported Catalysts for Direct Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 5-Methylfurfural

Industrially Applicable Aqueous-Phase Selective Hydrogenation of Furfural on an Efficient TiOx-Modified Ni Nanocatalyst

Tuning the Ni/TiO2 Catalyst Structure During Preparation for the Selective Hydrogenation of Furfural

Short Channeled Ni-Co/SBA-15 Catalysts for Highly Selective Hydrogenation of Biomass-Derived Furfural to Tetrahydrofurfuryl Alcohol

Highly Active and Selective NiFe/SiO2 Bimetallic Catalyst with Optimized Solvent Effect for the Liquid-Phase Hydrogenation of Furfural to Furfuryl Alcohol

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

Immobilized Highly Dispersed Ni Nanoparticles over Porous Carbon As an Efficient Catalyst for Selective Hydrogenation of Furfural and Levulinic Acid

Trimetallic NiZr/CoOx catalyst for the selective hydrogenation of furfural into furfuryl alcohol

Highly Efficient and Selective Hydrogenation of Biomass-Derived Furfural Using Interface-Active Rice Husk-Based Porous Carbon-Supported NiCu Alloy Catalysts

Dual Active Sites of Ni and FeNi3 Constructed from Layered Double Hydroxides for One-Pot Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol

Selective Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol in 2-Butanol over an Equimolar Ni-Cu-Al Catalyst Prepared by the Co-Precipitation Method

Selective Conversion of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)tetrahydrofuran over Ni-NC/SiO2 at Room Temperature

Total Hydrogenation of Hydroxymethylfurfural Via Hydrothermally Stable Ni Catalysts and the Mechanistic Study

Hydrogenation of Furfural to Cyclopentanone under Mild Conditions by a Structure-Optimized Ni-NiO/TiO2Heterojunction Catalyst

In-situ Constructing Ultrafine NiCo Alloy Confined in LDH Nanoflower for Efficient Selective Hydrogenation of Furfural

Titania-supported sub-nanometer sized Ru-Ni catalysts for the hydroxymethylfurfural hydrodeoxygenation