Abstract:In this work, an efficient bimetallic catalyst was developed to serve as a key factor for the successful hydrogenation of biomass-derived furfural (FF) to the high-value-added chemicals, namely 2-methylfuran (2- MF) and furfuryl alcohol (FA). The bare SBA-16 (SB-16) and Ru x /Ni y /SBA-16 (Ru x Ni y SB-16) catalysts with different weight percentages (x = 0.2, 0.4, 0.6, 0.8, 0.9 wt% and y = 0.8, 0.6, 0.4, 0.2, 0.1 wt%) were prepared through an in situ hydrothermal method. Characterization using XRD, FT-IR, FE-SEM, EDS, XPS, Pyridine FT-IR, and HR-TEM analysis confirmed the chemical and physical properties of the catalyst. To investigate the catalytic hydrogenation of FF to 2-MF using 2-propanol (2-PrOH) over Ru x Ni y SB-16 catalysts, various reaction parameters such as reaction temperature, time, catalyst loading, and alcohol ratio have been carried out. Among the catalysts tested, the Ru 0.8 Ni 0.2 SB-16 catalyst demonstrated outstanding performance under mild reaction conditions, achieving 100% conversion of furfural and an impressive selectivity of 88% towards 2-MF. The high selectivity of 2-MF can be attributed to the combined influence of metal and acid sites on the catalyst surface. Notably, the most active Ru 0.8 Ni 0.2 SB-16 catalyst stability was confirmed through five recycling tests, as there was no significant leaching of Ru and Ni. The Ru 0.8 Ni 0.2 SB-16 catalyst showed the highest stability based on the recycling test results. The excellent properties of these Ru x Ni y SB-16 catalysts are suitable for various industrial applications, including furfural hydrogenation and other hydroconversion processes.

Titania-supported sub-nanometer sized Ru-Ni catalysts for the hydroxymethylfurfural hydrodeoxygenation

Nickel - Titania Supported Catalysts for Direct Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 5-Methylfurfural

Highly Stable and Selective Ru/NiFe 2 O 4 Catalysts for Transfer Hydrogenation of Biomass-Derived Furfural to 2-Methylfuran

Efficient Catalytic Conversion of 5‐ Hydroxymethylfurfural to 2,5‐Furan‐dicarboxylic Acid over Ruthenium Cluster‐Embedded Ni(OH)2 Catalyst

Highly Efficient Production of DMF from Biomass-Derived HMF on Recyclable Ni-Fe/TiO2 Catalysts

Development of bimetallic Ru/Ni/SBA-16 catalysts for catalytic hydrogenation of bio-based furfural to 2-methylfuran and furfuryl alcohol

Spillover Hydrogen on Electron-Rich Ni/m-TiO2 for Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol

Dandelion-like Cobalt Oxide Microsphere-Supported RuCo Bimetallic Catalyst for Highly Efficient Hydrogenolysis of 5-Hydroxymethylfurfural

Ru/TiO2 catalyzed high‐yield synthesis of furanic diols by 5‐hydroxymethylfurfural hydrogenation with switchable selectivity

Selective Hydrogenation of 5-Hydroxymethylfurfural Triggered by a High Lewis Acidic Ni-based Transition Metal Carbide Catalyst

CO2‐assisted Controllable Synthesis of PdNi Nanoalloys for Highly Selective Hydrogenation of Biomass‐derived 5‐Hydroxymethylfurfural

Promoted Formation of Catalytically Active Species in Ni Nanoparticles by Low Content Ru Doping for Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

The catalytic hydrogenation of furfural to 2-methylfuran over the Mg-Al oxides supported Co-Ni bimetallic catalysts

Synergistic Catalysis on Atomic Ru-doped manganese oxide for Aerobic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Efficient aerobic oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran on supported Ru catalysts

Electron-Rich Ruthenium Nanoparticles on Nitrogen-Doped Carbon for the Efficient Catalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid

Investigation on the structure and performance of supported Ni nanoparticles for the hydrogenation of furfural

Highly Efficient, Amorphous Bimetal Ni-Fe Borides-Catalyzed Hydrogenolysis of 5-Hydroxymethylfurfural into 2,5-Dimethylfuran

Importance of oxyphilic FeNi alloy in NiFeAl catalysts for selective conversion of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Ni Supported on Zirconium Phosphate Catalysts.