Abstract:For heterogeneous supported catalysts, commonly, the adsorption of reactant molecules on the catalyst surface can significantly govern their activity and selectivity. In this paper, it was shown that surface oxygen-decorated bimetallic NiCu nanoparticles derived from ternary Ni–Cu–Al layered double hydroxide precursors exhibited better catalytic activity trends for the hydrogenolysis of biomass-derived carbonyl compounds compared with monometallic Ni or Cu ones. Specifically, bimetallic NiCu nanocatalyst achieved a maximum cyclopentanone yield of ∼89.5% in the aqueous phase hydrogenation of furfural. Based on a series of structural characterizations, catalytic experimental results, and density functional theory calculations, it was emphatically demonstrated that different catalytic behaviors might stem from the difference in the adsorption modes of the carbonyl group on the surfaces of monometallic Ni and bimetallic NiCu nanoparticles. It was deduced that due to the decoration of abundant surface oxygen species on bimetallic NiCu nanoparticles, the remaining exposed metal surface became η<sup>1</sup>(O)-type adsorption sites for the carbonyl group, different from the dominant η<sup>2</sup>(C, O) adsorption mode on monometallic Ni nanoparticles with less surface oxygen species. Most importantly, the present bimetallic NiCu nanoparticles as catalysts displayed superior catalytic performance in the hydrogenolysis of other carbonyl compounds (e.g., 5-hydroxymethylfurfural, benzaldehyde, and vanillin) to monometallic ones. Such surface oxygen decoration strategy endows bimetallic NiCu nanoparticles a great application potential in the catalytic conversions of biomass-derived carbonyl compounds.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01857?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01857</a>.Experimental section and additional spectra and data (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01857/suppl_file/an0c01857_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Immobilized Highly Dispersed Ni Nanoparticles over Porous Carbon As an Efficient Catalyst for Selective Hydrogenation of Furfural and Levulinic Acid

Highly efficient Ni-Mn/SiO<sub>2</sub> catalyst for the selective hydrogenation of biomass-derived levulinic acid to -valerolactone under mild conditions

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Carbon-encapsulated Ni catalysts derived from citrate complexes for highly efficient hydrogenation of furfural to tetrahydrofurfuryl alcohol

Highly Efficient and Selective Hydrogenation of Biomass-Derived Furfural Using Interface-Active Rice Husk-Based Porous Carbon-Supported NiCu Alloy Catalysts

Investigation on the structure and performance of supported Ni nanoparticles for the hydrogenation of furfural

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Single nickel atoms anchored on porous N-doped nanocarbon with dual reaction sites for highly-efficient transfer hydrogenation of furfural to furfuryl alcohol

Sulfonate Group Modified Ni Catalyst for Highly Efficient Liquid-Phase Selective Hydrogenation of Bio-Derived Furfural

Green and efficient selective hydrogenation of furfural to furfuryl alcohol over hybrid CoOx/Nb2O5 nanocatalyst in water

Highly efficient and selective hydrogenation of furfural to furfuryl alcohol and cyclopentanone over Cu-Ni bimetallic Catalysts: The crucial role of CuNi alloys and Cu + species

CO2‐assisted Controllable Synthesis of PdNi Nanoalloys for Highly Selective Hydrogenation of Biomass‐derived 5‐Hydroxymethylfurfural

Hierarchically Nitrogen‐doped Porous Carbon‐Supported Non‐noble Metal Nanoparticles for Promoting the Selective Hydrogenation of Furfural

Highly Active and Selective NiFe/SiO2 Bimetallic Catalyst with Optimized Solvent Effect for the Liquid-Phase Hydrogenation of Furfural to Furfuryl Alcohol

The Catalytic Behaviour in Aqueous-Phase Hydrogenation over a Renewable Ni Catalyst Derived from a Perovskite-Type Oxide.

Development of bimetallic Ru/Ni/SBA-16 catalysts for catalytic hydrogenation of bio-based furfural to 2-methylfuran and furfuryl alcohol

NiCu Nanoparticles for Catalytic Hydrogenation of Biomass-Derived Carbonyl Compounds

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

Facile synthesis of Ni/Fe3O4 derived from layered double hydroxides with high performance in the selective hydrogenation of benzaldehyde and furfural

Highly Selective Liquid-Phase Hydrogenation of Furfural over N-Doped Carbon Supported Metallic Nickel Catalyst under Mild Conditions