Abstract:In this work, N-doped activated carbon supported metallic nickel (Ni/NAC) catalysts were fabricated by two-step calcination method in N-2 atmosphere for liquid-phase hydrogenation of furfural (FAL). It was found that the pyrolysis temperature and amount of melamine as N doping source have important influence on N doping content and type in activated carbon (AC) support, resulting in the subsequently formed Ni nanoparticles on N-doped AC with different sizes and thus affording different catalytic hydrogenation activities. The results demonstrated that using N-doped AC with 1.0 g melamine at 1073 K in N-2 atmosphere as support, the obtained Ni/NAC at 873 K in N-2 atmosphere with Ni nanoparticle sizes of similar to 13.1 nm (denoted as Ni/NAC-1-1073) exhibits a N doping content of 3.65 at.% and a surface area of 561.2 m(2) g(-1) with a microporous structure. As catalyst for FAL hydrogenation, Ni/NAC-1-1073 demonstrated the best catalytic performance among all investigated catalysts, achieving almost 100% selectivity of tetrahydrofurfuryl alcohol (THFOL) with a complete FAL conversion at 353 K after 3 h reaction, while only 76.7% selectivity of THFOL with a FAL conversion of 86.4% was obtained using Ni/AC catalyst without N doping under the identical experimental conditions. Furthermore, it was found that almost 100% conversion of FAL to furfural alcohol (FOL) can be reached by transfer hydrogenation pathway in 2-proponal solvent using Ni/NAC-1-1073 at 413 K after 5 h reaction, whereas Ni/AC without N doping can only afford 30.2% conversion of FAL to FOL under the same conditions. The superior catalytic performance of Ni/NAC-11073 could be ascribed to a synergistic effect of nanosized Ni providing catalytic active sites, suitable N doping content and type in AC to promote catalytic performance, and advantageous structure characteristics of high surface area and porous structure favourable for the exposure of catalytic active sites and mass transport. (C) 2016 Elsevier B.V. All rights reserved.

Carbon-encapsulated Ni catalysts derived from citrate complexes for highly efficient hydrogenation of furfural to tetrahydrofurfuryl alcohol

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Immobilized Highly Dispersed Ni Nanoparticles over Porous Carbon As an Efficient Catalyst for Selective Hydrogenation of Furfural and Levulinic Acid

Single nickel atoms anchored on porous N-doped nanocarbon with dual reaction sites for highly-efficient transfer hydrogenation of furfural to furfuryl alcohol

Highly Efficient and Selective Hydrogenation of Biomass-Derived Furfural Using Interface-Active Rice Husk-Based Porous Carbon-Supported NiCu Alloy Catalysts

Carbon-Embedded Ni Nanocatalysts Derived from Mofs by A Sacrificial Template Method for Efficient Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol

Highly Selective Liquid-Phase Hydrogenation of Furfural over N-Doped Carbon Supported Metallic Nickel Catalyst under Mild Conditions

Sulfonate Group Modified Ni Catalyst for Highly Efficient Liquid-Phase Selective Hydrogenation of Bio-Derived Furfural

Trimetallic NiZr/CoOx catalyst for the selective hydrogenation of furfural into furfuryl alcohol

Hierarchically Nitrogen‐doped Porous Carbon‐Supported Non‐noble Metal Nanoparticles for Promoting the Selective Hydrogenation of Furfural

Insight into the catalytic mechanism of core–shell structured Ni/Ni-N/CN catalyst towards the oxidation of furfural to furancarboxylic acid

Highly Active and Selective NiFe/SiO2 Bimetallic Catalyst with Optimized Solvent Effect for the Liquid-Phase Hydrogenation of Furfural to Furfuryl Alcohol

Selective hydrogenation of furfural to tetrahydrofurfuryl alcohol in isopropanol over hydrotalcite-derived nickel-based catalyst

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

A highly accessible and robust carbon-coated cobalt nanoparticle catalyst for furfural hydrogenative valorization at mild reaction

Nitrogen-doped carbon nanotubes-supported PdNiCo nanoparticles as a highly efficient catalyst for selective hydrogenation of furfural

Green and efficient selective hydrogenation of furfural to furfuryl alcohol over hybrid CoOx/Nb2O5 nanocatalyst in water

Development of Robust CuNi Bimetallic Catalysts for Selective Hydrogenation of Furfural to Furfuryl Alcohol under Mild Conditions

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Development of nickel vanadium-impregnated activated carbon nanocomposites for electrocatalytic conversion of furfural into fuels