Abstract:Total hydrogenation of hydroxymethylfurfural (HMF) (including hydrogenation of both furan ring and carbonyl group) produces 2,5-bis-(hydroxymethyl) tetrahydrofuran (BHTF), which can be used as rigid polymer monomer, green solvent, or precursor of high-value chemicals and has great market potential. Although Ni is regarded as the most selective metal for the total hydrogenation of HMF, Ni catalysts often suffer sintering and leaching under hydrothermal conditions. In this regard, development of hydrothermally stable Ni catalysts is highly desirable. Here, Ni on well mixed oxides (Ni/MgaAl10-aOx) derived from layered double hydroxide (LDH) precursors was successfully synthesized via co-precipitation. The Ni/MgaAl10-aOx showed superior hydrothermal stability during the aqueous phase total hydrogenation of HMF, without noticeable activity loss, leaching and sintering after multiple reuse. In contrast, significant activity loss, leaching and sintering was observed for impregnated Ni counterparts. Catalyst characterization revealed the formation of highly dispersed Ni and well mixed porous oxides after the thermal reduction of the NiMgAl-LDH precursors as well as the stronger metalsupport interactions of the NiMgAl-LDH as compared to impregnated Ni catalysts with similar Ni particle size. The markedly improved hydrothermal stability was due to enhanced metal support interactions derived from the LDH precursors, which prevents the undesired agglomeration and leaching of Ni in the hydrothermal environment. Moreover, a high BTHF yield of 99.0% was obtained using the Ni/MgaAl10-aOx under optimal reaction conditions. Density functional theory calculations suggest that the total hydrogenation of HMF over the Ni catalysts proceeds through the alkoxy pathway via "flat-lying" adsorption.

Selective Conversion of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)tetrahydrofuran over Ni-NC/SiO2 at Room Temperature

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Formic acid enabled selectivity boosting in transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-furandimethanol on highly dispersed Co-N<sub><i>x</i></sub> sites

Selective transformation of biomass-derived 5-hydroxymethylfurfural to the building blocks 2,5-bis(hydroxymethyl)furan on α-Ni(OH)2/SiO2 catalyst without prereduction

Engineered Nickel Phyllosilicate for Selective 5-HMF C–O Bond Hydrogenation under Benign Conditions

Highly Efficient, Amorphous Bimetal Ni-Fe Borides-Catalyzed Hydrogenolysis of 5-Hydroxymethylfurfural into 2,5-Dimethylfuran

Hydroconversion of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran and 2,5-Dimethyltetrahydrofuran over Non-promoted Ni/SBA-15

Nickel - Titania Supported Catalysts for Direct Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 5-Methylfurfural

Efficient and Selective Hydrogenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over a Non-noble CoNCx/NiFeO Catalyst

Selective Hydrogenation of 5-Hydroxymethylfurfural Triggered by a High Lewis Acidic Ni-based Transition Metal Carbide Catalyst

Catalytic Transfer Hydrogenation of Biomass Derived 5-Hydroxymethylfurfural into 2,5-Dimethylfuran in a Methanol Medium

Selective Hydrogenation of 5-Hydroxymethylfurfural to 2,5-bis(hydroxymethyl)furan by Pt/Ni@C Catalyst

Selective and metal-free oxidation of biomass-derived 5-hydroxymethylfurfural into 2,5-diformylfuran over nitrogen-doped carbon materials

Catalytic Transfer Hydrogenolysis/Hydrogenation of Biomass-Derived 5-Formyloxymethylfurfural to 2, 5-Dimethylfuran over Ni–Cu Bimetallic Catalyst with Formic Acid As a Hydrogen Donor

CO2‐assisted Controllable Synthesis of PdNi Nanoalloys for Highly Selective Hydrogenation of Biomass‐derived 5‐Hydroxymethylfurfural

Highly Effective Activated Carbon‐supported Ni‐Mn Bifunctional Catalyst for Selective Hydrodeoxygenation of 5‐Hydroxymethylfurfural to 2,5‐Dimethylfuran

Selective Hydrogenation of 5-(Hydroxymethyl)furfural to 5-Methylfurfural over Single Atomic Metals Anchored on Nb2O5

Perovskite type oxide-supported Ni catalysts for the production of 2,5-dimethylfuran from biomass-derived 5-hydroxymethylfurfural

Nickel-tungsten carbide catalysts for the production of 2,5-dimethylfuran from biomass-derived molecules.

Importance of oxyphilic FeNi alloy in NiFeAl catalysts for selective conversion of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

Total Hydrogenation of Hydroxymethylfurfural Via Hydrothermally Stable Ni Catalysts and the Mechanistic Study