Abstract:In this work, using the methods of X-ray phase analysis, transmission electron microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy, the features of the impact of annealing in air within the temperature range of t = 200÷÷550 °C on the morphology, elemental and phase composition, chemical state and structure of primary particles of nanopowders obtained by grinding natural diamond and the method of detonation synthesis are studied. It is shown that heat treatment in air at given values of temperature and heating time does not affect the elemental composition and atomic structure of primary particles of nanopowders obtained both by the methods of detonation synthesis (DND) and natural diamond grinding (PND). Using XPS, Raman spectroscopy, and transmission electron microscopy, it has been found that annealing in air within the temperature range of 400–550 °C results in the effective removal of amorphous and graphite-like carbon atoms in the sp2- and sp3-states from diamond nanopowders by oxidation with atmospheric oxygen. In the original DND nanopowder, containing about 33.2 % of non-diamond carbon atoms of the total number of carbon atoms, after annealing for 5 h at a temperature of 550 °C, the relative number of nondiamond carbon atoms in the sp2-state decreased to ~21.4 %. In this case, the increase in the relative number of carbon atoms in the sp3-state (in the lattice of the diamond core) and in the composition of oxygen-containing functional groups ranged from ~39.8 % to ~46.5 % and from ~27 % to ~32.1 %, respectively. In the PND nanopowder, which prior to annealing contains about 10.6 % of non-diamond carbon atoms in the sp2-state of the total number of carbon atoms, after annealing under the same conditions as the DND nanopowder, their relative number decreased to 7.1 %. The relative number of carbon atoms in the sp3-state increased from 72.9 % to 82.1 %, and the proportion of carbon atoms in the composition of oxygen-containing functional groups also slightly increased from 10.2 % to 10.8 %. It is demonstrated that the annealing of PND and DND nanopowders in air leads to a change in their color, they become lighter as a result of oxidation of non-diamond carbon by atmospheric oxygen. The maximum effect is observed at a temperature of 550 °C and an annealing time of 5 h. In this case, the weight loss of PND and DND nanopowders after annealing was 5.37 % and 21.09 %, respectively. The significant weight loss of DND nanopowder compared to PND is primarily caused by the high content of non-diamond carbon in the initial state and the high surface energy of primary particles due to their small size.

Core–Shell Composites Based on Partially Oxidized Blend of Detonation Synthesis Nanodiamonds

Nano-polycrystalline diamond formation under ultra-high pressure

Synthesis of Nano-Polycrystalline Diamond under High Pressure and High Temperature

Detonation Synthesis Nanodiamond Soot as a Promising Filler for Polymer Composites

Structure and properties of self-assembled graphene oxide–detonation nanodiamond composites

Synthesis of Ni nanoclusters supported on diamond by plasma technique and their electrochemical properties

New Insights into the Reactivity of Detonation Nanodiamonds during the First Stages of Graphitization

Nanostructured Diamond Particles in the Development of Protective Anticorrosion Epoxy Coatings

Surface Functionalization and Structure Characterizations of Nanodiamond and Its Epoxy Based Nanocomposites

Morphology and Structural State of Particles of Nanopowders Prepared by Milling of Natural Diamond and by Detonation Synthesis

Air-thermal oxidation of diamond nanopowders obtained by the methods of mechanical grinding and detonation synthesis

Coherent interfaces with mixed hybridization govern direct transformation from graphite to diamond

The state of the art and prospects of detonation-synthesis nanodiamond applications in Belarus

Study on the Polycrystalline Mechanism of Polycrystalline Diamond Synthesized from Graphite by Direct Detonation Method

Determination of Non-Combustible Impurities in Detonation Diamond Nanopowder

Nanoengineered Polycrystalline Diamond Composites with Advanced Wear Resistance and Thermal Stability

A Theoretical Insight for Nucleation of Diamond-like Carbon

Micron Diamond Composites with Nanocrystalline Silicon Carbide Bonding

Extrastrong aggregates of detonation nanodiamonds: structure and formation

Coating of diamond by thermal explosion reaction

Diamond-graphite nanocomposite synthesized from multi-walled carbon nanotubes fibers