Durable Metallic Surfaces Capable of Passive and Active De‐icing

Kamran Alasvand Zarasvand,Cory Pope,Saeed Nazari,David Orchard,Catherine Clark,Joshua Brinkerhoff,Kevin Golovin

DOI: https://doi.org/10.1002/adem.202200573

IF: 3.6

2022-06-29

Advanced Engineering Materials

Abstract:Ice accretion has adverse effects on several industrial sectors including energy and transportation. Sparsely suspended, thin metallic sheets (Buckling Elastomer‐like Anti‐icing Metallic Surfaces, or BEAMS) recently demonstrated extremely low ice adhesion strengths while maintaining durability. Here, we designed BEAMS using elastomeric suspension points shaped as channels, enabling active de‐icing by flowing air underneath the suspended sheet. The channel geometry was optimized using computational fluid dynamics by iterating through various channel dimensions and flow conditions. The heat transfer was maximized while the pressure drop through the channel was minimized, for flow conditions resulting in an average surface temperature above 0 °C. An experimental setup was then constructed using the optimized channel geometry found from the simulations, and was utilized to assess BEAMS comprised of 1 – 4 channels. Active de‐icing was first achieved by pressurizing the air within the channels to bulge the sheet outward and delaminate accreted ice from the interface. BEAMS with one channel displayed the best performance when pressurized, and de‐icing occurred at a pressure of 1.4 kPa. Active de‐icing was also performed by flowing room temperature air through the channels to heat the surface and melt the interface. For the airflow experiments, BEAMS with 2 and 4 channels were evaluated. The onset of interfacial melting occurred faster in the 2‐channel case, requiring 78 s of airflow for an inlet pressure of 5.5 kPa, while it took 180 s for the 4‐channel configuration. Passive de‐icing was also observed under atmospheric icing conditions. Within an icing wind tunnel, high‐speed ≈ 20 μm droplets impacted multi‐channel BEAMS, accreting rime‐type ice. Ice adhesion strengths < 8 kPa were maintained after 10 consecutive icing/de‐icing runs, demonstrating substantial durability. The active and passive de‐icing capability of channeled BEAMS makes it a promising candidate for improving the operational efficiency of infrastructure in cold environments. This article is protected by copyright. All rights reserved.

materials science, multidisciplinary