Abstract:Migrating active deicing capabilities to transparent materials with low thermal conductivity has a high potential to improve the operations of several seminal industries in the automotive, robotic, energy, and aerospace sectors. However, the development of efficient and environmentally friendly deicing methods is yet in its infancy regarding their compatibility with end-user surfaces at relevant scales and real-world operations. Herein, we approach deicing through nanoscale surface activation enabled by surface acoustic waves (SAWs), allowing efficient on-demand deicing of surface areas spanning several square centimeters covered with thick layers of glace ice. We contemplate SAW-based deicing from a twofold perspective: First, we demonstrate its functionality both with a bulk piezoelectric material (LiNbO3) and a piezo-electric film (ZnO), the latter proving its versatile applicability to a large variety of functional materials with practical importance; second, we gain fundamental knowledge of the mechanisms responsible for efficient deicing using SAWs. In particular, we show that SAW vibrational modes easily transport energy over greater distances outside the electrode areas and efficiently melt large ice aggregates covering the materials' surfaces. In addition, the essential physics of SAW-based deicing is inferred from a carefully designed experimental and numerical study. We support our findings by providing macroscopic camera snapshots captured in situ inside a climate chamber during deicing and highly resolved laser-doppler vibrometer scans of the undisturbed wavefields at room temperature. Great care was taken to deposit the interdigital transducers (IDTs) used for SAW excitation only on ice-free areas close to the chip edges, leaving most of the substrate used for deicing unaltered and, as a matter of fact, demonstrating transparent deicing solutions.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop an efficient and environmentally - friendly de - icing method, especially for the large - area surface de - icing of transparent materials with low thermal conductivity. Specifically, the research aims to achieve the active de - icing function on the surface of transparent materials through Surface Acoustic Waves (SAW) technology and reveal the de - icing mechanism behind it. ### Main problems: 1. **Efficient and environmentally - friendly de - icing method**: Traditional de - icing methods are inefficient or environmentally unfriendly in some application scenarios. This paper proposes a new method based on SAW to improve the de - icing efficiency and reduce the impact on the environment. 2. **Large - area surface de - icing suitable for transparent materials with low thermal conductivity**: Key devices (such as cameras and sensors) in many industries (such as automobiles, robots, energy, and aerospace) are easily affected by ice accumulation. These devices usually use transparent materials with low thermal conductivity, so a technology that can perform large - area de - icing without affecting the material properties is required. ### Solutions: - **Surface Acoustic Waves (SAW) technology**: By exciting SAW on the material surface, energy can be effectively transferred to places far away from the electrode area, thus achieving large - area de - icing. Research shows that SAW can effectively propagate energy within a distance of several centimeters and can melt the thick ice layer covering the material surface. - **Compatible with multiple materials**: The research has been verified not only on bulk piezoelectric materials (such as LiNbO₃) but also on thin - film piezoelectric materials (such as ZnO), proving the wide applicability of this method. ### Key innovation points: 1. **Long - distance energy transfer**: SAW can still maintain sufficient energy in places far away from the electrode area to drive the de - icing process. 2. **De - icing of transparent materials**: For the first time, SAW de - icing on transparent materials with low thermal conductivity has been achieved, which makes it possible for applications in optical systems. 3. **Efficient and energy - saving**: By optimizing the design of IDT and material selection, the de - icing process is made more efficient and consumes less energy. In conclusion, by introducing SAW technology, this paper solves the limitations of traditional de - icing methods on transparent materials with low thermal conductivity and provides new solutions for practical applications in multiple industries.

Surface Acoustic Waves Equip Materials with Active Deicing Functionality: Unraveled Deicing Mechanisms and Application to Centimeter Scale Transparent Surfaces

Mechanisms of de-icing by surface Rayleigh and plate Lamb acoustic waves

A holistic solution to icing by acoustic waves: de-icing, active anti-icing, sensing with piezoelectric crystals, and synergy with thin film passive anti-icing solutions

Dynamic Mitigation Mechanisms of Rime Icing with Propagating Surface Acoustic Waves

Harnessing a Vibroacoustic Mode for Enabling Smart Functions on Surface Acoustic Wave Devices ‐ Application to Icing Monitoring and Deicing

Solar-assisted icephobicity down to -60C with superhydrophobic selective surfaces

Nanoscale “Earthquake” Effect Induced by Thin Film Surface Acoustic Waves as a New Strategy for Ice Protection

Atomic scale modeling of water and ice behavior on vibrating surfaces: towards design of Surface Acoustic Wave anti-icing and de-icing systems

Harnessing a Vibroacoustic Mode for Enabling Smart Functions on Surface Acoustic Wave Devices -- Application to Icing Monitoring and Deicing

Integrated transparent surface acoustic wave technology for active de-fogging and icing protection on glass

Self-Deicing Electrolyte Hydrogel Surfaces with Pa-level Ice Adhesion and Durable Antifreezing/Antifrost Performance

Icephobic Gradient Polymer Coatings Coupled with Electromechanical De‐icing Systems: A Promising Ice Repellent Hybrid System

A sunlight-responsive and robust anti-icing/deicing coating based on the amphiphilic materials

Photothermal Solid Slippery Surfaces with Rapid Self-Healing, Improved Anti/De-Icing and Excellent Stability

Metasurfaces Leveraging Solar Energy for Icephobicity

Flexible superhydrophobic films with the electrothermal and photothermal response for enhanced passive anti-icing and active de-icing

Bioinspired solar anti-icing/de-icing surfaces based on phase-change materials

Liquid-like slippery surface with passive-multi active strategy integration for anti-icing/de-icing

Wireless Powered Surface Acoustic Wave Platform for Achieving Integrated Functions of Fogging/Icing Protection and Monitoring

Bionic Fluorine-Free Multifunctional Photothermal Surface for Anti/de/Driving-Icing and Droplet Manipulation

Superhydrophobic Coatings with Synergistically Enhanced Anti/Deicing Performance by Optically/Electrically Assisted Heating