A promising self-assembly PTFE coating for effective large-scale deicing

Yadong Yu,Lei Chen,Ding Weng,Jiadao Wang,Chaolang Chen,Awais Mahmood

DOI: https://doi.org/10.1016/j.porgcoat.2020.105732

IF: 6.6

2020-01-01

Progress in Organic Coatings

Abstract:Ice accretion is detrimental for the safety of transmission lines, aircraft, and buildings, which may also result in economic loss. In this study, a thin polytetrafluoroethylene (PTFE) coating on the aluminum substrate was fabricated by electrostatic attraction self-assembly technique and proposed for large-scale deicing application. The shear-force F-ice analysis on deicing and related ice adhesion is conducted while interfacial toughness between solid-ice interfaces was also measured. Moreover, the surface morphology, wettability of the PTFE coated aluminum plate was also characterized. It was observed that the critical bonded length L-c between ice and PTFE coated surface is about 2.85 cm. When the bonded length L was higher than this value, the shear-force of dislodging ice could stay constant at about 50 N for the first deicing cycle. From the second deicing cycle, the constant shear-force is increased to 70 N and kept constant for at least ten cycles. Meanwhile, the surface roughness and water contact angle kept on increasing along with the loss of PTFE nanoparticles during icing deicing cycles. Ultimately, An ice layer with the size of 98 cm x 96 cmx1 cm (L x wxh) was developed on the surface of PTFE coated aluminum substrate for the demonstration of its fracture and falling off under ice's weight.