Abstract:Anti-icing superhydrophobic surfaces have attracted tremendous interests due to their repellency to water and extremely low ice affinity, whereas the weak durability has been the bottleneck for further applications. Surface durability is especially important in long-term exposure to low-temperature and high-humidity environments. In this study, a robust micro-nano-nanowire triple structure-held PDMS superhydrophobic surface was fabricated via a hybrid process: ultrafast-laser-prepared periodic copper microstructures were chemically oxidized, followed by modification of PDMS. The hedgehog-like surface structure was composed of microcones, densely grown nanowires, and tightly combined PDMS. The capillary force difference in micro-nanostructures drove PDMS solutions to distribute evenly, bonding fragile nanowires to form stronger composite cones. PDMS replaced the commonly used fragile fluorosilanes and protected nanowires from breaking, which endowed the surfaces with higher robustness. The ductile PDMS-nanowire composites possessed higher resiliency than brittle nanowires under a load of 1 mN. The surface kept superhydrophobic and ice-resistant after 15 linear abrasion cycles under 1.2 kPa or 60 icing-deicing cycles under -20 degrees C or 500 tape peeling cycles. Under a higher pressure of 6.2 kPa, the contact angle (CA) was maintained above 150 degrees until the abrasion distance exceeded 8 m. In addition, the surface exhibited a rare spontaneously optimized performance in the icing-deicing cycles. The ice adhesion strength of the surface reached its lowest value of 12.2 kPa in the 16th cycle. Evolution of surface roughness and morphology were combined to explain its unique U-shaped performance curves, which distinguished its unique degradation process from common surfaces. Thus, this triple-scale superhydrophobic surface showed a long-term anti-icing performance with high deicing robustness and low ice adhesion strength. The proposed nanostructure-facilitated uniform distribution strategy of PDMS is promising in future design of durable superhydrophobic anti-icing surfaces.

Effective Large-Scale Deicing Based on the Interfacial Toughness Tuning of a UV-curable PDMS Coating

Solvent Volatilization-Induced Cross-Linking of PDMS Coatings for Large-Scale Deicing Applications

Effect of Doping SiO2 Nanoparticles and Phenylmethyl Silicone Oil on the Large-Scale Deicing Property of PDMS Coatings.

A PDMS coating with excellent durability for large-scale deicing

Enhanced Anti-Icing Properties of Branched PDMS Coatings with Self-Regulated Surface Patterns

CNTs-induced superhydrophobic and photothermal coating with long-term durability and self-replenishing property for anti-icing/de-icing

Self-healing anti-icing coatings prepared from PDMS polyurea

Design and preparation of icephobic PDMS-based coatings by introducing an aqueous lubricating layer and macro-crack initiators at the ice-substrate interface

Durable and Organic-Solvent-free Anti-Icing Coating Fabricated from Polyacrylate Grafted with PDMS

Soft and Rigid Integrated Durable Coating for Large-Scale Deicing

A superhydrophobic Fe 3 O 4 @MSN-PDMS based composite coating with icephobicity, long-term durability and self-healing property for anti-/de-icing

Mechanically Robust Liquid-Embedded Coating with Anti-Icing/deicing Durability

Icephobic Durability of Branched PDMS Slippage Coatings Co-Cross-Linked by Functionalized POSS.

Anti-icing Performance of a Superhydrophobic PDMS/Modified Nano-silica Hybrid Coating for Insulators

Icephobic Durability of Molecular Brush-Structured PDMS Soft Coatings.

A sunlight-responsive and robust anti-icing/deicing coating based on the amphiphilic materials

Facile One-Step Fabrication of PHC/PDMS Anti-Icing Coatings with Mechanical Properties and Good Durability

Preparation and Evaluation of Hydrophobic Surfaces of Polyacrylate-Polydimethylsiloxane Copolymers for Anti-Icing

Ultralow Icing Adhesion of a Superhydrophobic Coating Based on the Synergistic Effect of Soft and Stiff Particles

Micro-Nano-Nanowire Triple Structure-Held PDMS Superhydrophobic Surfaces for Robust Ultra-Long-Term Icephobic Performance.

Anti-Icing Performance of a Coating Based on Nano/Microsilica Particle-Filled Amino-Terminated PDMS-Modified Epoxy