Robust Photothermal Coating Strategy for Efficient Ice Removal

Yubo Liu,Yang Wu,Yizhe Liu,Rongnian Xu,Shujuan Liu,Feng Zhou
DOI: https://doi.org/10.1021/acsami.0c13367
2020-09-21
Abstract:Preventing ice formation and ice swift removal from the solid surface are essential in numerous application fields. Superhydrophobic coating is an effective way to delay the icing phenomenon. However, the superhydrophobic coating was wetted easily after icing–deicing cycles that led to the failure of anti-icing. In this study, a robust, amphiphobic coating consisted of fluorinated multiwalled carbon nanotubes (FMWCNTs) and commercial polyurethane was constructed by a simply spray process. Because of the addition of FMWCNTs, the coating demonstrated a good amphiphobic feature and highly efficient photothermal conversion, which endowed the coating surface with excellent deicing and defrosting characteristics under sunlight irradiation. In addition, self-cleaning and self-healing properties of the coating under sunlight ensured its efficient photothermal conversion and long service life. To further improve the photothermal deicing effect, a coating system containing a photothermal layer (P), thermal-conductive layer (C), and thermal-protective layer (P) was constructed. The heat generating from the photothermal layer can transfer the whole coating surface by the conductive layer, but with limited transmission to substrate materials by a thermal-protective layer. The coating system can still deice and defrost rapidly on the whole surface and only a small portion of photothermal coating was irradiated under extremely low temperature. The outdoor experiment has confirmed that the coating melted and removed snow rapidly in a winter environment. The multifunctional photothermal deicing coating may have a wide application in outdoor surrounding.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13367?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13367</a>.Scheme of the sand abrasion test; optical images of coating surfaces after sand abrasion; surface morphology of the coating surface after sand abrasion; CAs of water and hexadecane on the amphiphobic coating surfaces after sand abrasion; photographs of the amphiphobic coating surface after blade slashing; TEM images of raw MWCNTs at various amplifications; ice delay loss after plasma treatment; optical images and water CAs on surfaces after photothermal deicing/defrost and after 10 min 1 sun irradiation and ice delay recovery on the photothermal coating; photographs and infrared image of the photothermal deicing process on the self-healed PCP coating (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_001.pdf">PDF</a>)Wettability of the photothermal coating (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_002.mp4">MP4</a>)Freezing process of the water droplet (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_003.mp4">MP4</a>)Freezing process of the water droplet (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_004.mp4">MP4</a>)Photothermal deicing performances (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_005.mp4">MP4</a>)Defrosting performances (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_006.mp4">MP4</a>)Partial irradiated photothermal deicing performances (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_007.mp4">MP4</a>)PCP coating to study snow melting (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13367/suppl_file/am0c13367_si_008.mp4">MP4</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?