All‐Day Anti‐Icing/De‐Icing Coating by Solar‐Thermal and Electric‐Thermal Effects

Yubo Liu,Rongnian Xu,Ning Luo,Yizhe Liu,Yang Wu,Bo Yu,Shujuan Liu,Feng Zhou
DOI: https://doi.org/10.1002/admt.202100371
IF: 6.8
2021-07-03
Advanced Materials Technologies
Abstract:<p>Ice formation is a common phenomenon that brings security risks in numerous fields. A superhydrophobic surface can greatly delay icing time due to its liquid repellence feature, but it fails under cold and humid conditions. In this work, a photo-thermal@electro-thermal superhydrophobic coating (PESC) consisting of electric-conductive carbon nanotubes (ECNTs) and fluoro-modified polyacrylate is constructed by means of spray to realize both anti-icing and de-icing simultaneously. Traditional ECNTs not only provide hierarchical micro-nano structures to construct superhydrophobic surfaces for anti-icing, but also guarantee de-icing capacity because of solar-thermal and electric-thermal effects. In warm daytime, enough heat is generated by solar-thermal conversion to keep the temperature of the coating surface above zero to achieve anti-icing and de-icing. On a cloudy day or extremely cold day, the coating also can stay warm to prevent icing, owing to photo-thermal and electric-thermal dual effects. And during the cold nighttime, the coating is heated to prevent icing after it is electrified as a result of electric-thermal effects. The PESC system can reduce electricity consumption from the maximum, fulfilling eco-friendly and energy saving concepts. This functional superhydrophobic coating with anti-icing and swift de-icing performance may have broad application prospects in the power industry.</p>
materials science, multidisciplinary
What problem does this paper attempt to address?
The paper attempts to address the issue of effectively preventing icing and rapidly de-icing under various environmental conditions (such as cold, wet, etc.). Specifically, traditional anti-icing and de-icing methods have problems such as low efficiency, environmental pollution, and mechanical damage. This paper proposes a superhydrophobic coating (PESC) with photothermal and electrothermal effects, aiming to achieve all-weather anti-icing and de-icing functions by combining photothermal and electrothermal effects. ### Main Issues: 1. **Limitations of Traditional Anti-Icing and De-Icing Methods**: - Mechanical de-icing is inefficient and requires a lot of manpower or mechanical equipment. - Chemical de-icing agents (such as salt and polyols) can lower the freezing point but have short-term effects and cause environmental pollution. - Existing anti-icing and de-icing surface materials (such as superhydrophobic surfaces, liquid-infused surfaces, crack initiators, etc.) perform poorly at extremely low temperatures and are prone to failure due to liquid evaporation or continuous release. 2. **Developing an Efficient and Environmentally Friendly Anti-Icing and De-Icing Material**: - The material should effectively prevent icing and rapidly de-ice under different weather conditions (sunny, cloudy, night). - The material should have self-cleaning properties to maintain surface photothermal efficiency and extend its service life. - The material should have good mechanical stability and durability to adapt to various environmental conditions in practical applications. ### Solution: This paper proposes a photothermal-electrothermal superhydrophobic coating (PESC) based on carbon nanotubes (CNTs) and fluorine-modified acrylate (FPA). The coating is prepared by a spraying method and has the following characteristics: - **Superhydrophobicity**: By forming micro-nano structures, it reduces the contact area between water and the surface, delaying the icing process. - **Photothermal Effect**: Under sunlight, the coating can absorb solar energy and convert it into heat, preventing icing. - **Electrothermal Effect**: By applying voltage, the coating can generate Joule heat, further increasing the surface temperature, preventing icing, and rapidly de-icing. - **Self-Cleaning Performance**: The superhydrophobic properties of the coating surface give it self-cleaning ability, which can remove contaminants and maintain surface photothermal efficiency. ### Experimental Verification: - **Delayed Icing Performance**: Experimental results show that the time for water droplets on the PESC coating surface to completely freeze at −15°C is 14 times longer than on a bare glass surface. - **Photothermal and Electrothermal Performance**: At −30°C, the temperature changes of the PESC coating under different light intensities and voltages indicate that photothermal and electrothermal effects can significantly increase the surface temperature, preventing icing. - **De-Icing Performance**: Experiments verified the de-icing ability of the PESC coating at extremely low temperatures (−30°C). Both clean ice and dirty ice can be removed in a short time. - **Outdoor Application Test**: A self-powered system, including solar cells and a controller, was designed. Experiments proved that this system can effectively prevent icing and rapidly de-ice in sunny, cloudy, and night conditions. ### Conclusion: The PESC coating proposed in this paper has excellent anti-icing and de-icing performance, suitable for various practical application scenarios such as the power industry. The coating can not only effectively prevent icing under different weather conditions but also rapidly de-ice, showing broad application prospects.