Abstract:Ice accretion has adverse effects on several industrial sectors including energy and transportation. Sparsely suspended, thin metallic sheets (Buckling Elastomer‐like Anti‐icing Metallic Surfaces, or BEAMS) recently demonstrated extremely low ice adhesion strengths while maintaining durability. Here, we designed BEAMS using elastomeric suspension points shaped as channels, enabling active de‐icing by flowing air underneath the suspended sheet. The channel geometry was optimized using computational fluid dynamics by iterating through various channel dimensions and flow conditions. The heat transfer was maximized while the pressure drop through the channel was minimized, for flow conditions resulting in an average surface temperature above 0 °C. An experimental setup was then constructed using the optimized channel geometry found from the simulations, and was utilized to assess BEAMS comprised of 1 – 4 channels. Active de‐icing was first achieved by pressurizing the air within the channels to bulge the sheet outward and delaminate accreted ice from the interface. BEAMS with one channel displayed the best performance when pressurized, and de‐icing occurred at a pressure of 1.4 kPa. Active de‐icing was also performed by flowing room temperature air through the channels to heat the surface and melt the interface. For the airflow experiments, BEAMS with 2 and 4 channels were evaluated. The onset of interfacial melting occurred faster in the 2‐channel case, requiring 78 s of airflow for an inlet pressure of 5.5 kPa, while it took 180 s for the 4‐channel configuration. Passive de‐icing was also observed under atmospheric icing conditions. Within an icing wind tunnel, high‐speed ≈ 20 μm droplets impacted multi‐channel BEAMS, accreting rime‐type ice. Ice adhesion strengths < 8 kPa were maintained after 10 consecutive icing/de‐icing runs, demonstrating substantial durability. The active and passive de‐icing capability of channeled BEAMS makes it a promising candidate for improving the operational efficiency of infrastructure in cold environments. This article is protected by copyright. All rights reserved.

Metallic Plate Buckling As a Low Adhesion Mechanism for Durable and Scalable Icephobic Surface Design

Durable Metallic Surfaces Capable of Passive and Active De‐icing

Effect of Curvature on Durable Ice-Phobic Surfaces Based on Buckling Metallic Plates

Crack-Initiated Durable Low-Adhesion Trilayer Icephobic Surfaces with Microcone-Array Anchored Porous Sponges and Polydimethylsiloxane Cover.

Self-Deicing Electrolyte Hydrogel Surfaces with Pa-level Ice Adhesion and Durable Antifreezing/Antifrost Performance

Metallic skeleton promoted two-phase durable icephobic layers

Tailoring the Icephobic Performance of Slippery Liquid-Infused Porous Surfaces through the LbL Method

3D Liquid-Based Porous Coating Integrated with Oleophilic MXene Nanoflakes for Durable Ultra-Low Ice Adhesion and Exceptional Photothermal Slippery Properties

Microporous metallic scaffolds supported liquid infused icephobic construction

Robust Photothermal Icephobic Surface with Mechanical Durability of Multi‐bioinspired Structures

Understanding the Solid–Ice Interface Mechanism on the Hydrophobic Nano-Pillar Structure Epoxy Surface for Reducing Ice Adhesion

Reframing ice adhesion mechanisms on a solid surface

Trifolium repens L.-Like Periodic Micronano Structured Superhydrophobic Surface with Ultralow Ice Adhesion for Efficient Anti-Icing/Deicing

Improving resonant ice protection systems with substrate optimization

A promising self-assembly PTFE coating for effective large-scale deicing

Enhanced Surface Icephobicity on an Elastic Substrate

Micro/Nano Hierarchical Crater-Like Structure Surface With Mechanical Durability and Low-Adhesion for Anti-Icing/Deicing

Multiscale Crack Initiator Promoted Super-Low Ice Adhesion Surfaces.

Fracture-Promoted Ultraslippery Ice Detachment Interface for Long-Lasting Anti-icing

Anti-ice-pinning superhydrophobic surfaces for extremely low ice adhesion

Thermodynamics of sustaining liquid water within rough icephobic surfaces to achieve ultra-low ice adhesion