Abstract:Based on a multi‐angle optical path system, the transient characteristics and sites of the pre‐BD in the spark conditioning under the PFV in vacuum are determined experimentally. The results reveal the sequential relationship of the pre‐BD sites and are quite significant to understand the physical mechanism in the spark conditioning. The objective of this paper is to determine the transient characteristics and sites of the pre‐breakdown (pre‐BD) in the spark conditioning under power frequency voltage (PFV) in vacuum. A multi‐angle optical path system was designed and made the determination of the pre‐BD sites in spark conditioning possible, through one camera at two viewing angles. The experimental results indicate that, in the spark conditioning under PFV, the pre‐BDs continuously occurred at a random moment. Within several half‐waves, the number of the pre‐BDs could reach dozens of times, which was the key for the treatment of the electrode surface in conditioning. Under the application of PFV, the single pre‐BD occurred at a random moment, in which it would last for several microseconds and the peak value of the current would reach several amperes. Moreover, the pre‐BD sites randomly distributed in the surface of the electrode and almost covered the whole surface of the electrode. The pre‐BDs took place independently in both time and space, in which there should be no effect between each other of two sequential pre‐BDs. To sum up, the transient characteristics and the sites of the pre‐BDs determined in this paper could reveal the physical mechanism of the pre‐BD on the treatment of electrode surface in the conditioning process, which is quite significant to improve the BD voltage of vacuum interrupter.

Lightening Impulse Breakdown of Vacuum Gaps in Series—Part I: Partial Breakdown

Lightening Impulse Breakdown of Vacuum Gaps in Series—Part II: Bridging Resistor

Interdependence of Pressure and Shield Potential in Interrupter of Vacuum Circuit Breaker

Breakdown voltage characteristics of combined air gaps under negative lightning impulse

Prediction Method of the Breakdown Probability for Multiple Vacuum Gaps in Series Considering Dielectric Recovery under a Lightning Impulse Voltage

Transient characteristics and sites of pre‐breakdown in spark conditioning for high‐voltage vacuum interrupter under power frequency voltage

Breakdown Process Experiments of 110-to 500-Kv Insulator Strings under Short Tail Lightning Impulse

Experiment and Simulation of Air Gap Breakdown Characteristics Under Short-tail Impulse Waveform

Experimental Study and Analysis of Insulator Breakdown Characteristics with Short-tail Lightning Impulse

Partial Discharge Characteristics in a Vacuum Interrupter under Different Shield Potentials

Motion and Breakdown Related to Microparticles in Vacuum Gap

Study on Impulse Breakdown Characteristics of Internal-Gap Lightning Protection Device Applied to 35 kV Distribution Line

Investigation of Partial Discharge Characteristics inside Vacuum Interrupter with Various Floating Shield Potentials

“Multi-Particle-in-Series” Phenomenon and Discharge Properties Induced by Multiple Free Particles in GIS

Partial Discharge Characteristics of Uniform Gap in Oil-Impregnated Paper Insulation under Switching Impulse Voltage

Breakdown Path and Condition of Air-Insulated Rod–plane Gap with Polymeric Barrier Inserted under Alternating Voltages

Integrated modelling of vacuum flashover development: Above‐surface processes and breakdown threshold analyses

Physical mechanism of initial breakdown pulses and narrow bipolar events in lightning discharges

Breakdown characteristics in pulsed-driven dielectric barrier discharges: influence of the pre-breakdown phase due to volume memory effects

Air Breakdown Behavior of Two Series Gaps for Composite Switching Impulse/alternating Voltage

Electric characteristics of pseudo-spark during breakdown phase