Abstract:Ammonia (NH3) as a carbon-free fuel is gaining much attention in the shipping industry for its enormous po-tential of global decarbonization, which is expected to achieve large-scale applications in marine engines by dual-fuel (DF) combustion technology. As such, this study was conducted to explore the emission reduction potential of NH3/diesel DF combustion strategy via low-pressure gas injection in large low-speed two-stroke marine engines using computational fluid dynamics (CFD) modeling coupled with chemical kinetics. An estab-lished in-house CFD platform, KIVA-CHEMKIN-CDAC, was employed to perform engine simulations, while an DF combustion mechanism was constructed in this work to mimic the oxidation behaviors of NH3 and diesel as well as the emissions formation. It was found that NH3 admission exhibits a significant inhibiting effect on the autoignition of pilot fuel. Increasing ammonia substitution ratio (ASR) will prolong the ignition delay, resulting in high intensity of premixed combustion. Generally, NH3/diesel DF combustion mode shows two-stage heat release shape. The first stage is characterized by the premixed combustion of diesel-NH3-air mixtures, whereas the dominant combustion regime of the second stage highly depends on the NH3 concentration in the premixed charge. In the very lean NH3-air mixtures, the second stage corresponds to the mixing-controlled diffusion combustion phase; but for the richer NH3-air mixtures, it could be controlled by the turbulent flame propagation. NOx emission decreases when the ASR does not exceed 40%, otherwise increases significantly. The former is probably due to the Thermal DeNOx process dominated by NH2 + NO = N2 + H2O, while the latter is due to the fuel-bound nitrogen. As expected, CO2 emission is reduced monotonically for the same total fuel energy with the increase of ASR, confirming that the utilization of zero-carbon fuel is the most direct means to reduce CO2 emissions. Moreover, there is a trade-off relationship between NOx and N2O emissions. This is because N2O formation usually occurs at lower temperatures (i.e., T < 1400 K). Furthermore, advancing the pilot-fuel in-jection timing could reduce the unburned NH3 and N2O emissions. Therefore, optimization of injection timing can achieve lower emissions while maintain higher efficiency.

Exploration of environmentally friendly marine power technology -ammonia/diesel stratified injection

Numerical Investigation of Diesel Spray Combustion Characteristics in the Ammonia/air Atmosphere

Optimizations of energy fraction and injection strategy in the ammonia-diesel dual-fuel engine

Investigation on the Potential of Using Carbon-Free Ammonia in Large Two-Stroke Marine Engines by Dual-Fuel Combustion Strategy

Simulation Research on the Injection Strategy of a Diesel-Ammonia Dual-Fuel Marine Engine

Study on marine engine combustion and emissions characteristics under multi-parameter coupling of ammonia-diesel stratified injection mode

Pilot diesel-ignited ammonia dual fuel low-speed marine engines: A comparative analysis of ammonia premixed and high-pressure spray combustion modes with CFD simulation

Fuel reactivity stratification assisted jet ignition for low-speed two-stroke ammonia marine engine

Ammonia marine engine design for enhanced efficiency and reduced greenhouse gas emissions

Numerical investigation on the combustion and emission characteristics of ammonia in a low-speed two-stroke marine engine

Effect of ammonia jet strategy and intake air temperature on mixing characteristics in ammonia/diesel dual-fuel marine engine

Effect of ammonia/hydrogen blending and injection modes on combustion emission and performance of marine engine

Application of enhanced combustion strategies and optimized ignition timing for achieving high thermal efficiency and low N2O emissions of marine ammonia engine at full-load condition

Optimization of Combustion Cycle Energy Efficiency and Exhaust Gas Emissions of Marine Dual-Fuel Engine by Intensifying Ammonia Injection

Potential of ammonia energy fraction and diesel pilot-injection strategy on improving combustion and emission performance in an ammonia-diesel dual fuel engine

Investigation of Low Carbon Emission and High Thermal Efficiency of Diesel Engine Combined with High-Pressure Direct Injection of Hydrogen Carrier: Ammonia

Performance characteristics of a two-stroke low speed engine applying ammonia/diesel dual direct injection strategy

Applicability Analysis and Combustion Simulation of Ammonia as Fuel for Marine Diesel Engine

Stratified Charge Assisted Jet Ignition Mode (scaji) for Low-Speed Two-Stroke Otto Cycle Ammonia Marine Engine

CFD investigation the combustion characteristic of ammonia in low-speed marine engine under different combustion modes

Experimental study on the effects of pilot injection strategy on combustion and emission characteristics of ammonia/diesel dual fuel engine under low load