Ammonia marine engine design for enhanced efficiency and reduced greenhouse gas emissions

Xinyi Zhou,Tie Li,Run Chen,Yijie Wei,Xinran Wang,Ning Wang,Shiyan Li,Min Kuang,Wenming Yang

DOI: https://doi.org/10.1038/s41467-024-46452-z

IF: 16.6

2024-03-07

Nature Communications

Abstract:Abstract Pilot-diesel-ignition ammonia combustion engines have attracted widespread attentions from the maritime sector, but there are still bottleneck problems such as high unburned NH 3 and N 2 O emissions as well as low thermal efficiency that need to be solved before further applications. In this study, a concept termed as in-cylinder reforming gas recirculation is initiated to simultaneously improve the thermal efficiency and reduce the unburned NH 3 , NO x , N 2 O and greenhouse gas emissions of pilot-diesel-ignition ammonia combustion engine. For this concept, one cylinder of the multi-cylinder engine operates rich of stoichiometric and the excess ammonia in the cylinder is partially decomposed into hydrogen, then the exhaust of this dedicated reforming cylinder is recirculated into the other cylinders and therefore the advantages of hydrogen-enriched combustion and exhaust gas recirculation can be combined. The results show that at 3% diesel energetic ratio and 1000 rpm, the engine can increase the indicated thermal efficiency by 15.8% and reduce the unburned NH 3 by 89.3%, N 2 O by 91.2% compared to the base/traditional ammonia engine without the proposed method. At the same time, it is able to reduce carbon footprint by 97.0% and greenhouse gases by 94.0% compared to the traditional pure diesel mode.

multidisciplinary sciences

What problem does this paper attempt to address?

The main issues this paper attempts to address are the low combustion efficiency of ammonia fuel in marine engines, high emissions of unburned ammonia (NH₃) and nitrous oxide (N₂O), and low thermal efficiency. Specifically, ammonia fuel has great potential as an alternative fuel in the maritime industry, but currently faces the following bottlenecks:

1. **High unburned ammonia (NH₃) emissions**: Ammonia fuel tends to produce a large amount of unburned ammonia during combustion, which not only affects combustion efficiency but also has a negative impact on the environment.
2. **High nitrous oxide (N₂O) emissions**: N₂O is a potent greenhouse gas, with a greenhouse effect approximately 265-298 times that of carbon dioxide. Therefore, high N₂O emissions significantly offset the advantage of ammonia fuel in reducing greenhouse gas emissions.
3. **Low thermal efficiency**: The thermal efficiency of existing ammonia fuel engines is relatively low, affecting their economic and environmental performance.

To overcome these issues, the study proposes a new concept—In-Cylinder Reforming Gas Recirculation (IRGR). By conducting rich ammonia combustion in one cylinder of a multi-cylinder engine and partially decomposing ammonia into hydrogen, then recirculating the exhaust of this dedicated reforming cylinder to other cylinders, the method combines the advantages of hydrogen-enriched combustion and exhaust gas recirculation. This approach simultaneously improves thermal efficiency and reduces emissions of unburned ammonia, NOx, N₂O, and greenhouse gases. The study shows that under conditions of 3% diesel energy ratio and 1000 RPM, the IRGR method can increase indicated thermal efficiency by 15.8%, reduce unburned ammonia by 89.3%, reduce N₂O by 91.2%, reduce carbon footprint by 97.0%, and reduce greenhouse gas emissions by 94.0%.