Abstract:Compared to fossil fuels, ammonia is an environmentally friendly, cost-effective, and readily available fuel that carries hydrogen. It is expected to play a crucial role in the development of carbon-neutral internal combustion engines for the next generation. However, a significant challenge arises due to the presence of nitrogen in both the fuel and air, leading to the complex generation of intertwined thermal and fuel-based nitrogen oxides (NOx) during ammonia combustion. To gain a deeper understanding of NOx emission characteristics and propose effective technologies for controlling NOx emissions from ammonia engines, it is essential to decouple the mechanisms responsible for thermal and fuel-based NOx and analyze the formation and evolution of both types separately. In this study, a novel approach employing argon circulation is applied to eliminate the thermal NOx formation mechanism. This allows for a detailed investigation of fuel-based NOx emissions in ammonia spark ignition engines. The results reveal that nitric oxide (NO) species still dominates, accounting for over 98% of the fuel NOx emissions under the investigated conditions. Furthermore, fuel NOx exhibits distinct concentration distribution patterns within the combustion chamber and displays a different relationship with engine control variables compared to thermal NOx. Specifically, fuel-based NOx is likely produced as a by-product of chemical equilibrium calculations within the flame front, with subsequent evolution within the burned zone. Moreover, fuel-based NOx increases with delayed spark timing, in contrast to the trend observed for thermal NOx. Lean operation favors fuel NOx formation, although excessively lean operation reduces NOx due to a lower nitrogen content in the fuel-oxidizer mixture. On the other hand, rich operation prevents NOx formation because of the ammonia’s de-NOx effect. The emissions of nitrous oxide (N2O) in the exhaust gases primarily originate from newly formed N2O during the late oxidation stage. Of these N2O, a portion of N2O is formed close to the cold walls, and another portion results from the partial oxidation of ammonia released from the crevice volume, where ammonia is trapped during the primary combustion stage. Lean operation promotes N2O formation and should be avoided to minimize its emissions. In conclusion, the implementation of the argon circulation system successfully elucidates the characteristics of fuel NOx formation in engines, which have been fully addressed in previous discussions. Moreover, this approach can also be extended to other engine types, such as ammonia-methane spark ignition engines, ammonia-hydrogen spark ignition engines, and compression ignition engines converted to ammonia-diesel dual-fuel engines.

Fuel reactivity stratification assisted jet ignition for low-speed two-stroke ammonia marine engine

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Combustion of Premixed Ammonia and Air Initiated by Spark- Ignited Micro-gasoline-jet in a Constant Volume Combustible Vessel

Feasibility study of hydrogen jet flame ignition of ammonia fuel in marine low speed engine

Application of enhanced combustion strategies and optimized ignition timing for achieving high thermal efficiency and low N2O emissions of marine ammonia engine at full-load condition

Numerical investigation on the combustion and emission characteristics of ammonia in a low-speed two-stroke marine engine

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Comparison of the combustion and emission characteristics of NH3/NH4NO2 and NH3/H2 in a two-stroke low speed marine engine

Toward zero carbon emissions: High thermal efficiency low speed two-stroke marine engine using pure ammonia fuel

Performance characteristics of a two-stroke low speed engine applying ammonia/diesel dual direct injection strategy

Effect of ammonia/hydrogen blending and injection modes on combustion emission and performance of marine engine

Pilot diesel-ignited ammonia dual fuel low-speed marine engines: A comparative analysis of ammonia premixed and high-pressure spray combustion modes with CFD simulation

Exploration of environmentally friendly marine power technology -ammonia/diesel stratified injection

Simulation Research on the Injection Strategy of a Diesel-Ammonia Dual-Fuel Marine Engine

Ammonia marine engine design for enhanced efficiency and reduced greenhouse gas emissions

CFD investigation the combustion characteristic of ammonia in low-speed marine engine under different combustion modes

Preliminary assessment of the potential for rapid combustion of pure ammonia in engine cylinders using the multiple spark ignition strategy

Optimizations of energy fraction and injection strategy in the ammonia-diesel dual-fuel engine

Application of Argon Circulation to Investigate Fuel Nitrogen Oxides Emission Characteristics of Ammonia Spark Ignition Engines

Stage-wise Kinetic Analysis of Ammonia Addition Effects on Two-Stage Ignition in Dimethyl Ether

Numerical investigation of ammonia-rich combustion produces hydrogen to accelerate ammonia combustion in a direct injection SI engine