Abstract:In pursuit of carbon neutrality, the adoption of zero-carbon fuels in internal combustion engines offers a path to zero carbon emissions. Among such fuels, ammonia (NH 3 ) stands out as an effective hydrogen energy carrier with a higher energy density and a more advanced production-storage-transportation lifecycle than hydrogen (H 2 ) fuel, making it a superior alternative. Nevertheless, achieving high combustion efficiencies in engine cylinders requires the use of fuels with fast flame speeds, since the time scales of the combustion event are practically milliseconds. The inherent flame speed of NH 3 falls short, typically necessitating augmentation with H 2 . Yet, the in-situ generation of H 2 from NH 3 remains constrained, rendering the flame speed of NH 3 less competitive against traditional fuels like gasoline and natural gas. To address the dual challenges of slow flame speed of NH 3 and the difficulty of generating large amounts of H 2 from NH 3 onboard, this study evaluates an alternative method of accelerating the ammonia combustion in the engine combustion chamber through the use of multiple spark plugs, which is limited discussed in existing research. Numerical simulations performed in this study show that the application of the multi-spark strategy increases the mass burn rate, advances the combustion phasing, shortens the combustion duration, increases the engine power output, improves the fuel economy, and reduces the unburned ammonia emissions, all of which indicate that rapid combustion of pure ammonia is achieved in the combustion chamber. Moreover, the use of multiple spark points does not lead to a marked increase in nitrogen oxides emissions, thereby ensuring no added stress on exhaust aftertreatment systems. In addition, pure ammonia combustion appears to be very well adapted to this strategy, as evidenced by the avoidance of excessive cylinder pressures and pressure rise rates—a challenge faced by conventional spark ignition engines, given ammonia notably slower flame speed relative to conventional petroleum-based fuels. Overall, all these findings strongly support that the multi-spark ignition system presents a compelling direction for future zero-carbon ammonia engines. However, it is crucial to address design challenges to ensure that the engine head layout provides sufficient cooling, structural robustness, optimal breathing efficiency, and reliable multi-ignition events within the confined space.

Feasibility study of hydrogen jet flame ignition of ammonia fuel in marine low speed engine

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Combustion of Premixed Ammonia and Air Initiated by Spark- Ignited Micro-gasoline-jet in a Constant Volume Combustible Vessel

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Fuel reactivity stratification assisted jet ignition for low-speed two-stroke ammonia marine engine

Effect of ammonia/hydrogen blending and injection modes on combustion emission and performance of marine engine

Theoretical investigation of the combustion performance of ammonia/hydrogen mixtures on a marine diesel engine

Combustion and Emission Characteristics of an Ammonia-Hydrogen Engine under Passive- and Active-Jet Ignition

Comparison of the combustion and emission characteristics of NH3/NH4NO2 and NH3/H2 in a two-stroke low speed marine engine

Application of enhanced combustion strategies and optimized ignition timing for achieving high thermal efficiency and low N2O emissions of marine ammonia engine at full-load condition

Numerical investigation on the combustion and emission characteristics of ammonia in a low-speed two-stroke marine engine

An Evaluation of the Conversion of Gasoline and Natural Gas Spark Ignition Engines to Ammonia/Hydrogen Operation From the Perspective of Laminar Flame Speed

CFD investigation the combustion characteristic of ammonia in low-speed marine engine under different combustion modes

Pilot diesel-ignited ammonia dual fuel low-speed marine engines: A comparative analysis of ammonia premixed and high-pressure spray combustion modes with CFD simulation

Study on lean combustion of ammonia-hydrogen mixtures in a pre-chamber engine

Simulation Research on the Injection Strategy of a Diesel-Ammonia Dual-Fuel Marine Engine

Assessing Hydrogen-Ammonia Ratios to Achieve Rapid Kernel Inception in Spark Ignition Engines

Preliminary assessment of the potential for rapid combustion of pure ammonia in engine cylinders using the multiple spark ignition strategy

An experimental study of a strategy to improve the combustion process of a hydrogen-blended ammonia engine under lean and WOT conditions

Toward zero carbon emissions: High thermal efficiency low speed two-stroke marine engine using pure ammonia fuel

Ammonia Combustion Using Hydrogen Jet Ignition (AHJI) in Internal Combustion Engines