Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Effect of Plane Mirrors Combined with Au-Nanoparticle Confinement on the Spectral Properties of Fe Plasma Induced by Laser-Induced Breakdown.

Effect of Mirror Quality on Optical Response of Nanoparticle‐on‐Mirror Plasmonic Nanocavities

Influence of Planar Mirror Confinement and Temperature Control upon the Elemental Analysis of Soil by Laser-Induced Breakdown Spectroscopy

Performance investigation of pre-ablation and reheating orthogonal double-pulse nanoparticle enhanced laser-induced breakdown spectroscopy

The signal quality improvement of laser-induced breakdown spectroscopy due to the microwave plasma torch modulation

Investigation of the multi-elemental self-absorption mechanism and experimental optimization in laser-induced breakdown spectroscopy

Flame-assisted plasma modulation to improve the raw signal quality for laser-induced breakdown spectroscopy

Comparison of three nanoparticle deposition techniques potentially applicable to elemental mapping by nanoparticle-enhanced laser-induced breakdown spectroscopy

A comparative study of nanoparticle-enhanced laser-induced breakdown spectroscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Optimization of nanoparticle-enhanced laser-induced breakdown spectroscopy for the hyperspectral chemical mapping of solid samples

Sensitivity improvement in the measurement of minor components by spatial confinement in fiber-optic laser-induced breakdown spectroscopy

Simulation of LSPR Optical and Electric Field Enhancement Distribution Based on Gold Nanobipyramids Using a Modified Nanosphere

Quantitative Analysis method of laser-induced breakdown spectroscopy based on temperature iterative correction of self-absorption effect

Generation of High-Temperature and Low-Density Plasmas for Improved Spectral Resolutions in Laser-Induced Breakdown Spectroscopy

[Influence of laser power and incident angle as well as testing distance on laser inducted breakdown spectroscopy (LIBS) technology for spectroscopy diagnosis and multi-element analysis]

Hybridized plasmon modes and near-field enhancement of metallic nanoparticle-dimer on a mirror

Improvement of laser induced breakdown spectroscopy signal using gas mixture

Spectral Interference Elimination and Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy Assisted with Laser-Stimulated Absorption

Application of laser induced breakdown spectroscopy(LIBS) to microdetection of Au film machining

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection