Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Optimization of nanoparticle-enhanced laser-induced breakdown spectroscopy for the hyperspectral chemical mapping of solid samples

Comparison of three nanoparticle deposition techniques potentially applicable to elemental mapping by nanoparticle-enhanced laser-induced breakdown spectroscopy

Emission Enhancement of Femtosecond Laser-Induced Breakdown Spectroscopy by Combining Nanoparticle and Dual-Pulse on Crystal SiO 2

Enhancing biomarker detection sensitivity through tag-laser induced breakdown spectroscopy with NELIBS

A comparative study of nanoparticle-enhanced laser-induced breakdown spectroscopy

Study on the improvement of laser induced plasma detection method by Au-nanoparticles

Parametric Study of Spot Size and Multi-Elemental Quantification of Geomaterials under Complex Matrix Conditions Using Fiber-Optic Laser-Induced Breakdown Spectroscopy

Nanoparticles Enhanced Laser-Induced Breakdown Spectroscopy for Characterisation and Discrimination of Gemstones

Nanoscale Laser-Induced Breakdown Spectroscopy Imaging Reveals Chemical Distribution with Subcellular Resolution

Analysis of Cs Solution by Nano-Silica Particles-Enhanced Laser-Induced Breakdown Spectroscopy

Performance investigation of pre-ablation and reheating orthogonal double-pulse nanoparticle enhanced laser-induced breakdown spectroscopy

Mapping nanoparticles injected into a biological tissue using laser-induced breakdown spectroscopy

Optimization of liquid jet system for laser-induced breakdown spectroscopy analysis

Laser-induced Breakdown Spectroscopy: a New Approach for Nanoparticle's Mapping and Quantification in Organ Tissue.

Three-dimensional Topographic and Multi-Elemental Mapping by Unilateral-Shift-subtracting Confocal Controlled LIBS Microscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Emission Enhancement of Laser-Induced Breakdown Spectroscopy for Aqueous Sample Analysis Based on Au Nanoparticles and Solid-Phase Substrate.

Improvement of the Spatial Resolution of the Spatial Mapping of Metallic Coatings by Using Picosecond LIBS

Novel Signal Enhancement Strategy for Laser-Induced Breakdown Spectroscopy via Miniaturized Atmospheric Pressure Glow Discharge

Optimization of Laser Induced Breakdown Spectroscopy System by Neurogenetic Method for Multi-Elemental Analysis of Heavy Metals in Soil

Portable confocal-controlled LIBS microscopy for topographic and LIBS mapping