Abstract:In this work, high energy synchrotron X-ray diffraction was used during tensile testing of an as-cast eutectic AlCoCrFeNi2.1 high entropy alloy. Aside, from determining for the first time the volume fractions of existing phases, we further detail their role on the alloy deformation behavior. The two major phases, a soft disordered FCC and a hard ordered B2 BCC, were observed to exhibit a stress partitioning effect which can be used to modulate the mechanical response of the material based on the relative volume fraction of each phase. Dislo-cation density analysis revealed that the soft FCC phase had a significantly higher dislocation density right after the onset of plastic deformation. This is attributed to the existence of strain gradients across the lamellar structure, where the hard B2 BCC prevents free deformation of the FCC phase. Nonetheless, despite the increase of the dislocation density in the soft FCC phase, calculations of the strengthening effects induced by generation of dislocations are more significant in the hard B2 BCC phases, as this phase is primarily responsible for the strength increase in the alloy. Besides, the evolutions in dislocation density of the soft FCC and hard B2 BCC phases during tensile deformation obtained from synchrotron X-ray diffraction data are consistent with the evolution of KAM determined by EBSD characterization. Also, lattice strain analysis across two principal directions (parallel and perpendicular to the loading axis) reveals that for these specific orientations there is a preferential deformation of the hard FCC planes which can be related to the deformation response of specific lattice planes at distinct ori-entations, as well as to the phase partitioning stress behavior.

Effects of precipitate size and spacing on deformation-induced fcc to bcc phase transformation

Stress induced precipitates microstructure in the anisotropy alloys

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Deformation of Fe and Ag Precipitates in Cu Matrix

Investigating Elastic Deformation of Ordered Precipitates by Ab Initio-Informed Phase-Field Crystal Modeling

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Size effects of γ′ precipitate on the creep properties of directionally solidified nickel-base super-alloys at middle temperature

Atomic-Scale Insights into the Deformation Mechanism of the Microstructures in Precipitation-Strengthening Alloys

Atomic-scale study of the mechanical properties of dual-phase fcc/bcc crystallites: influences of alloying elements and phase boundaries

Atomistic Simulation of Deformation Behaviors Polycrystalline CoCrFeMnNi High-Entropy Alloy under Uniaxial Loading

Effect of Precipitation Phase on the Flow Behavior of a Nickel-Based Superalloy During Compressive Deformation

Size Effects Of Gamma ' Precipitate On The Creep Properties Of Directionally Solidified Nickel-Base Super-Alloys At Middle Temperature

Phase field crystal modelling of deformation assisted precipitation in binary alloys

Atomistic Simulation of Interactions Between an Edge Dislocation and Cu Precipitates with Different Chemical Compositions in Α-Fe

Effect of the structure and volume fraction of nanophase on the mechanical properties of (FeNi)86B14 amorphous nanocrystalline alloys

The Effect of Size of Cu Precipitation on the Mechanical Properties of Microalloyed Steel

Deformation Behavior and Strengthening Effects of an Eutectic AlCoCrFeNi2.1 High Entropy Alloy Probed by In-Situ Synchrotron X-ray Diffraction and Post-Mortem EBSD

Effects of Alloying on Deformation Twinning in High Entropy Alloys

Micro/nano-mechanical behaviors of individual FCC, BCC and FCC/BCC interphase in a high-entropy alloy

Phase-Field Simulation of the Elastic Effect on the Transformation Kinetics in Precipitation

Investigation of the Size Effect of Nickel-Base Superalloy Single Crystals Based on Strain Gradient Crystal Plasticity