Abstract:Removal and sequestration of CO2 from flue gas has been proposed as one of the most reliable solutions to mitigate globe greenhouse emissions. Adsorption technology based on porous adsorbent is known to be one of the most efficient processes for the CO2 capture from flue gas. The key issue of this technology is to find the adsorbent with high adsorption capacity and selectivity for CO2. In this chapter, both the experimental and the computer simulation works about the CO2 adsorption behavior on porous materials in our laboratory were introduced. In the experimental works, the mesoporous materials such as MCM-41 and SBA-15 were selected as the fundamental adsorbent. After surface modification by aminosilane, the amine groups became active centers and the CO2 adsorption capacity was obviously increased due to the chemisorption. It is shown that the dual amine groups of AEAPMDS had better effect on CO2 adsorption than the single amine group of APTS. The best CO2 adsorption capacity of MCM-41-AEAPMDS was 2.20 mmol.g(-1) at room temperature. Another effective way was incorporation metal Mg into the mesoporous materials. By various impregnating or doping methods, such as the co-condensation, the dispersion with the enhancement of Al3+ or amine, and the ionic exchange, a suitable amount of Mg2+ can be successfully introduced into MCM-41 and SBA-15, which effectively increased the CO2 adsorption capacity. Different pore structures had their corresponding optimized methods, the real reason behind was the highly dispersed MgO state in the channels. The best CO2 adsorption capacities of Mg-Al-SBA-15-D1 and Mg-EDA-MCM-41-D10 were about 1.35 mmol.g(-1). In the simulation works, some novel porous materials such as the micro/mesoporous composite, the covalent organic frameworks, the metal organic framework and the zeolitic imidazolate frameworks were selected as the potential adsorbents for the CO2 capture. The CO2 adsorption behavior of the zeoilte of MFI, the mesoporous MCM-41 and the micro/mesoporous composite of MFI/MCM-41 were simulated and compared. It is revealed that the micro/mesoporous composite had better performances on the CO2 adsorption capacity and selectivity at high pressure, as well as the diffusion performance.

Adsorption behaviour of molecular sieve and activated carbon for CO2 adsorption at cold temperatures

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Simultaneous removal of SO2 and NOx from flue gas by low-temperature adsorption over activated carbon

Influence of flue gas components on SO 2 adsorption by activated carbon at low temperature

Influence of Flue Gas Components on SO2 Adsorption by Activated Carbon at Low Temperature

Characteristics and Mechanism of Low-Temperature NO Adsorption by Activated Carbon

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

Systematic investigation of SO2 adsorption and desorption by porous powdered activated coke: Interaction between adsorption temperature and desorption energy consumption

Activated carbon-based CO2 uptake evaluation at different temperatures: The correlation analysis and coupling effects of the preparation conditions

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

Effect of carbonization temperature on CO2 adsorption behavior of activated coal char

Adsorption and Desorption Experimental Study of Carbon Dioxide/Methane Mixture Gas on 13X-Type Molecular Sieves

Experimental study on adsorption promotion and desorption restrain of gas-containing coal in low-temperature environment

Density functional theory study of high-temperature CO2 adsorption by Li2ZrO3: Effect of typical flue gas components on adsorption energy and electronic properties

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

Recent Advances in the Research of High-temperature CO2 Adsorbents and Absorbents

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Experimental Study on Influencing Factors and Thermal Effects of CO 2 Adsorption by Coal

Factors Influencing the Methane Adsorption Capacity of Coal and Adsorption Heat Variations

Zeolite Apgiia for Adsorption Based Carbon Dioxide Capture