Abstract:The external sulfate attack (ESA) is a complex degradation process typically compromising the durability of underground foundations, nuclear or industrial waste containments and tunnel linings exposed to sulfate solutions. The structures affected usually remain covered its entire service life, which compromises the detection of this phenomenon before severe material degradation has occurred. Once diagnosed, the large size and criticality of the typical structures affected greatly limit the efficiency of the remedial actions. Consequently, monitoring of the evolution of the structural behavior is often the only applicable measure. This scenario places the development of reliable tools to assist the design of sulfate-resisting concrete structures and assess the risk of ESA in existing properties as key challenges for structural durability. The present thesis aims to advance knowledge in this field by presenting important contributions in three different research lines: numerical modeling of the ESA, role of porosity during the attack and the relevance of reproducing field-like conditions on ESA assessments. Advances on the ESA numerical modelization led to the development of a chemo-transport-mechanical model and a simplified assessment methodology. The former simulates the effects of ionic transport, chemical reactions, degradation mechanisms and the mechanical response of the structure. The validations performed indicate that the model captures the importance of the location of the ettringite formed within the pore network and provides a fair quantification of the overall expansions. The simplified assessment methodology evaluates the risk of failure during the ESA based on the aggressiveness of the media, the reactivity and mechanical properties of the material and the geometric characteristics and service life of the element under attack, without resorting to complex iterative algorithms. Unlike current design guidelines, the application of this simplified procedure allows the definition of flexible and optimized precautionary measures for each application. The second research line involved an extensive experimental program that led to the formulation of a conceptual model to explain the role of porosity during the ESA. The results obtained indicate that high durability against the attack might be achieved by limiting the penetration of sulfates or increasing the capacity of the matrix to accommodate expansive products. Both approaches correspond to opposing pore characteristics of the matrix: the former is usually associated with low porosities while the latter requires matrices with high porosities. These results question the common perception that high porosities are always negative for ESA durability and open up the possibility to design sulfate-resisting materials by increasing the capacity of the matrix to accommodate expansive phases. The third research line evaluates the influence of early sulfate exposure and the effects of confinement on the ESA by two experimental programs. The first study suggests that the delayed exposition to sulfates commonly adopted in accelerated laboratory tests might lead to imprecise damage estimations for structures cast in situ. In these cases, it is recommended to expose the samples to sulfates shortly after casting. The second study suggests that assessing sulfate resistance on specimens in free-expanding conditions might not be representative of the behavior of real structures where the attack is developed in combination with confining conditions. Results indicate that compressive stresses generated by confinement interact with the normal development of the attack by limiting or delaying the appearance of micro-cracks and reducing the amount of ettringite crystals exerting expansive pressures.

Reliability of the Damage Rating Index to Assess Condition of Concrete Affected by External Sulfate Attack

Reliability assessment of concrete under external sulfate attack

Evaluation of alkali–silica reaction damage in concrete by using acoustic emission signal features and damage rating index: damage monitoring on concrete prisms

Monitoring accelerated alkali-silica reaction in concrete prisms with petrography and electrical conductivity measurements

The Use of Artificial Intelligence for Assessing Damage in Concrete Affected by Alkali-Silica Reaction (ASR).

Internal corrosion characteristics of endogenous sulfate introduced by recycled aggregates in recycled aggregates concrete: Insights into the macro-mechanical and meso-mechanical properties

Assessment of effects of ASR-induced cracking on direct shear strength of recycled concrete

Damage Generated and Propagated by the AAR Reactive Aggregate from Kingston, Ontario, Canada

Concrete Deterioration Mechanisms under Combined Sulfate Attack and Flexural Loading

New insights on the fundamentals and modeling of the external sulfate attack in concrete structures

Damage Constitutive Model and Mechanical Performance Deterioration of Concrete under Sulfate Environment

Microscopic assessment of ASR-affected columns after 20 years in service

A failure thickness prediction model for concrete exposed to external sulfate attack

Durability of self-consolidating concrete to different exposure regimes of sodium sulfate attack

A study into the effects of test variables on the results of concrete tests for salt scaling and alkali-silica reaction

Investigation of concrete exposed to dual sulfate attack

Damage Mechanism of Concrete Deteriorated by Sulfate Attack in Wet-Dry Cycle Environment

Effect of external sulfate attack on the tensile properties of fiber-reinforced sprayed concrete

A visual condition assessment of a reinforced concrete railway bridge subject to alkali silica reaction (ASR) deterioration in Johannesburg

Finite element analysis on the diffusion-reaction-damage behavior in concrete subjected to sodium sulfate attack

Damage Analyses of Concrete Dams Subject to Alkali-Silica Reaction