Abstract:This paper studied the microscopic and mechanical property degradation of axially compressed concrete with different steel fiber content under chemical erosion and freeze-thaw environment. Concrete cylinders with three types of steel fiber contents (0%, 1%, 2%) were selected to study the durability behavior concerning different environmental effects up to 28 days, which included tap water, 3.5% sodium chloride solution, 10% sodium sulfate solution, 5% sulfuric acid solution, 2 mol/L sodium hydroxide solution, and 100 freeze-thaw cycles. The variation of specimens’ microstructure and axial bearing capacity with different fiber content was studied with the chemical erosion cycle increase, and the mass and pH variations of the specimen were measured. According to the law of micro-cracks, the deterioration degree was judged, and a numerical analysis model was established to quantify the reliability of the structure with different fiber content. The results show that the addition of steel fiber can effectively improve the axial bearing capacity of concrete, and a freeze-thaw environment and chemical erosion can accelerate fiber-reinforced concrete’s failure. The optimal content of steel fiber was determined, which is 1% for sodium chloride and sodium sulfate environments, and 2% for the freeze-thaw cycle, dilute sulfuric acid, and sodium hydroxide environments. The finite element software Abaqus was used to simulate and analyze the freeze-thaw cycle and mechanical test of concrete, which verified the rationality of the test results. Research results will provide a theoretical basis for predicting the performance deterioration of steel fiber reinforced concrete under different erosion conditions and periods.

Effect of external sulfate attack on the tensile properties of fiber-reinforced sprayed concrete

Study on the Mechanical Properties and Microstructure of Fiber-Reinforced Concrete Subjected to Sulfate Erosion

Influence of accelerator type and dosage on the durability of wet-mixed sprayed concrete against external sulfate attack

Effect of Steel Fiber on Mechanical Properties and Microstructure of Magnesium Phosphate Cement-Based Concrete Exposed to Water and Sulfate Attack

Fracture Mechanical Properties of Steel Fiber Reinforced Self-Compacting Concrete under Dry–Wet Cycle Sulfate Attack

Mitigation potential of sulfate-resistant Portland cement for internal sulfate attack

Behavior of Steel-Fiber Reinforced Lightweight Self-Compacting Concrete Containing LECA after the Exposure to Internal Sulfate Attack

Effect of the Combination of Superabsorbent Polymers for Autogenous Shrinkage Control with Steel Fibers of High-Performance Concrete under Uniaxial Tension Using DIC

Experimental Investigation on Shear Strength and Microstructure of Chemically Treated Sisal Fiber-Reinforced Concrete

Sulfate erosion investigation on FRP-confined concrete in cold region

Experimental Study and Evaluation of Bonding Properties Between Fiber and Cement Matrix under Sulfate Attack

Influence of internal sulfate attack on cement paste properties: contamination by pyrite

Sulfate resistance of ultra-high performance concrete with recycled fine aggregate

Experimental research on durability of high-performance synthetic fibers reinforced concrete: Resistance to sulfate attack and freezing-thawing

Mechanical properties, flexural behavior, and chloride permeability of high-performance steel fiber-reinforced concrete (SFRC) modified with rice husk ash and micro-silica

Sulfate attack on concrete with mineral admixtures

Decay of fracture parameters of concrete under sulfate environments

Investigation on Mechanical and Microstructure Properties of Steel Fiber Reinforced Concrete

Roles of fly ash, granulated blast-furnace slag, and silica fume in long-term resistance to external sulfate attacks at atmospheric temperature

Effect of an Early-Age Exposure on the Degradation Mechanisms of Cement Paste under External Sulfate Attack

The damage evolution behavior of polypropylene fiber reinforced concrete subjected to sulfate attack based on acoustic emission