Abstract:This paper presents a new spiral smoothing method to generate smooth curved tool paths directly on mesh surfaces. Spiral tool paths are preferable for computer numerical control (CNC) milling, especially for high-speed machining. At present, most spiral tool path generation methods aim mainly for pocketing, and a few methods for machining complex surface also suffer from some inherent problems, such as selection of projecting direction, preprocessing of complex offset contours, easily affected by the mesh or mesh deformation. To address the limitations, a new spiral tool path method is proposed, in which the radial curves play a key role as the guiding curves for spiral tool path generation. The radial curve is defined as one on the mesh surface that connects smoothly one point on the mesh surface and its boundary. To reduce the complexity of constructing the radial curves directly on the mesh surface, the mesh surface is first mapped onto a circular region. In this region, the radial lines, starting from the center, are planned and then mapped inversely onto the mesh surface, thereby forming the desired radial curves. By traversing these radial curves using the proposed linear interpolation method, a polyline spiral is generated, and then, the unfavorable overcuts and undercuts are identified and eliminated by supplementing additional spiral points. Spline-based technique of rounding the corners is also discussed to smooth the polyline spiral, thereby obtaining a smooth continuous spiral tool path. This method is able to not only greatly simplify the construction of radial curves and spiral tool path but also to have the ability of processing and smoothing complex surfaces. Experimental results are presented to validate the proposed method.

Tool Path Planning with Confined Scallop Height Error Using Optimal Connected Fermat Spirals

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Iso-scallop tool path planning for triangular mesh surfaces in multi-axis machining

Non-retraction toolpath generation for irregular compound freeform surfaces with the LKH TSP solver

Length-optimal tool path planning for freeform surfaces with preferred feed directions

Generic Tool path planning method of T-spline surface CNC milling

An Optimisation Algorithm for Reducing the Number of Turns on Space-Filling Curve Toolpath for Sculptured Surface Milling

Non-singular tool path planning by translating tool orientations in C-space

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

The generation of supplementary toolpaths for surface machining based on rapid prediction of scallop height distributions

Constant Scallop Height Algorithm of Self-Adaptive Tool Orientation with Toroidal Cutter

Smooth Fillet-End Cutter Tool Path Generation Method on Triangular-Mesh Surface Based on Modified Butterfly Subdivision

Spiral Tool Path Generation Method on Mesh Surfaces Guided by Radial Curves