Abstract:In freeform surface finishing, there are three major types of tool path topologies: the direction-parallel type, the contour-parallel type and the space-filling curve (SFC) type. The SFC topology is capable of covering the whole surface with only one path. In this paper, we present a new way of planning the SFC type tool path by formulating the planning task as a traveling salesman problem (TSP). The optimal path is generated in two steps. Firstly, a set of regular cutter contact (CC) points is generated on the input surface. A cutting simulation method is developed to evaluate the scallop error and determine the position of the next CC point in cross-feed direction. This method is free of local surface curvature assumptions and is therefore accurate for big cutters. Secondly, the obtained CC points are input into an efficient TSP solver LHK for the optimal CC point linking sequences. To stop the CC points from diagonal linking or penetrating linking, the Euclidean distance evaluation function for two CC points is redefined in LHK. The proposed tool path generation method is verified with several freeform surface examples; the results show that the method can automatically find the optimal feed direction and it can generate shorter tool path than the traditional SFC method. The feasibility of the proposed method is also verified by a cutting experiment. A new way of planning SFC type tool path is proposed.Cutting simulation method is proposed to evaluate the scallop error.Tool path planning task is formulated as a TSP and LKH is applied for solution.In LKH, the distance function is redefined to avoid incorrect linking problem.

Non-retraction toolpath generation for irregular compound freeform surfaces with the LKH TSP solver

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

Study of Free-Form Surface Non-Contact Measurement子Path Planning and Related Algorithms

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Non-singular tool path planning by translating tool orientations in C-space

A New Global Toolpath Linking Algorithm for Different Subregions with Travelling Saleman Problem Solver

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

NC Tool Path Generation Based on Adaptive Projection Method for Freeform Surfaces

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Tool Path Generation of Freeform Surfaces Based on Parameter Curves

Generic Tool path planning method of T-spline surface CNC milling

Tool Path Planning with Confined Scallop Height Error Using Optimal Connected Fermat Spirals

Length-optimal tool path planning for freeform surfaces with preferred feed directions

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture