Abstract:The iso-scallop method has been long adopted to achieve a shorter overall machining length. The efficiency and machining performance of this method are largely dominated by the initial tool path. The preferred direction field supplies the local best feed directions. Usually, the offset paths generated by the iso-scallop method largely deviate from the preferred directions, even though the initial path is strictly along the preferred directions. The matching degree of the offset paths and preferred direction field should be taken into consideration when selecting an initial tool path. This paper presents a novel initial path selection method for the iso-scallop method to make whole iso-scallop tool paths and the preferred direction field consistent as much as possible. A surface is re-parameterized to keep the conformality between the surface and parametric domain, which leads to the more regular offset paths on the new parametric domain. By fitting the vector field, streamlines are generated for representing the preferred feed direction on the parametric domain. The offset similarity metric defined by the initial path and streamlines is constructed to measure the matching degree between offset paths and preferred feed directions. Then the feasible path with the best offset similarity for the streamlines will be selected as the initial tool path. In our case study, feed directions with the maximum strip width are chosen. The test results have shown that the tool paths generated by the proposed method achieved a better matching for the selected feed directions and a shorter overall length compared with some existing tool path generation methods.

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

An iso-scallop tool path generation method for three-axis machining freeform surface

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Iso-level tool path planning for free-form surfaces

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

Generation of offset surface for tool path in NC machining through level set methods

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Non-retraction toolpath generation for irregular compound freeform surfaces with the LKH TSP solver

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Study of Free-Form Surface Non-Contact Measurement子Path Planning and Related Algorithms

Isoscallop of Self-Adaptive Tool Orientation with Toroidal Cutter under Optimum Orientation of MCPs

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Initial tool path selection of the iso-scallop method based on offset similarity analysis for global preferred feed directions matching

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Tool Path Planning with Confined Scallop Height Error Using Optimal Connected Fermat Spirals

Length-optimal tool path planning for freeform surfaces with preferred feed directions