Abstract:This article introduces an eco-friendly method for the reclamation of carbon fiber-reinforced polymers (CFRP). The research project involved numerous experiments using microwave-assisted pyrolysis (MAP) to explore a range of factors, such as the inert gas flow, the power level, the On/Off frequency of rotation, and the reaction duration. To design the experiments, the three-level Box-Behnken optimization tool was employed. To determine the individual and combined effects of the input parameters on the thermal decomposition of the resin, the data were analyzed using least-squares variance adjustment. The results demonstrate that the models developed in this study were successful in predicting the direct parameters of influence in the microwave-assisted decomposition of CFRPs. An optimal set of operating conditions was found to be the maximum nitrogen flow (2.9 L/min) and the maximum operating experimental power (914 W). In addition, it was observed that the reactor vessel's On/Off rotation frequency and that increasing the reaction time beyond 6 min had no significant influence on the resin elimination percentage when compared to the two other parameters, i.e., power and carrier gas flow rate. Consequently, the above-mentioned conditions resulted in a maximum resin elimination percentage of 79.6%. Following successful MAP, various post-pyrolysis treatments were employed. These included mechanical abrasion using quartz sand, chemical dissolution, thermal oxidative treatment using a microwave (MW) applicator and thermal oxidative treatment in a conventional furnace. Among these post-treatment techniques, thermal oxidation and chemical dissolution were found to be the most efficient methods, eliminating 100% of the carbon black content on the surface of the recovered carbon fibers. Finally, SEM evaluations and XPS analysis were conducted to compare the surface morphology and elementary constitution of the recovered carbon fibers with virgin carbon fibers.

Recycling of Waste Glass Fiber Reinforced Plastics (GFRP) via Pyrolysis with Sodium Hydroxide using Microwave Heating

Recycling Technology for Waste Glass Fiber Reinforced Plastics (GFRP) Using Pyrolysis with NaOH

Recovery of carbon fiber from Carbon Fiber Reinforced Polymer waste via microwave molten-carbonate pyrolysis

Study on Recycling Carbon Fibers from Carbon Fiber Reinforced Polymer Waste by Microwave Molten Salt Pyrolysis

Evaluation of Mechanical Properties and Pyrolysis Products of Carbon Fibers Recycled by Microwave Pyrolysis

Recycling of Carbon Fibers from CFRP Waste by Microwave Thermolysis

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Microwave-Assisted Pyrolysis of Carbon Fiber-Reinforced Polymers and Optimization Using the Box-Behnken Response Surface Methodology Tool

Continuous process design of the microwave chemical recycling of waste plastics using microwave-absorbing heating elements

Microwave pyrolysis as a method of recycling glass fibre from used blades of wind turbines

Carbon Fiber Recovery from Carbon Fiber Reinforced Polymer Matrix Composite by Microwave Pyrolysis

Depolymerization of Waste PET with Phosphoric Acid–Modified Silica Gel Under Microwave Irradiation

From Automotive Shredder Residue to Nano-Ceramics and Graphitic Carbon—thermal Degradation Kinetics

Recovery of gaseous fuels through CO 2 -mediated pyrolysis of thermosetting polymer waste

Efficient method of recycling carbon fiber from the waste of carbon fiber reinforced polymer composites

Research on Microwave Pyrolysis Recovery and Reuse Performance of Carbon Fiber Composites

Recycling Glass Fiber from Polyurethane Composite by Pyrolysis Strategy with High Mechanical Properties

Understanding the kinetics of waste plastic catalytic pyrolysis under microwave irradiation for enhanced resource valorization

Chemical Recycling of Plastics by Microwave‐Assisted High‐Temperature Pyrolysis

Research on a two-step pyrolysis-oxidation process of carbon fiber-reinforced epoxy resin-based composites and analysis of product properties

Studies on Recycling Silane Controllable Recovered Carbon Fiber from Waste CFRP