Abstract:Renewable energy production with wind turbines has been rising in the last 30 years and it is a crucial technology, which is necessary for the energy transition. As sustainable as the energy production of wind turbines is, the waste management of the blade material is not. Most of the blades end up on a landfill or get incinerated. There are different types of recycling methods, but the most commonly used is to shred the fibers into little pieces and reusing them for filler material in the concrete industry. This approach does not actually split up the blade material into its components but it is more of a downcycling. In this thesis, a new type of pyrolysis will be looked into, which splits up the blade material into its components namely glass fibers and plastic using molten salt. This process would make the glass fiber industry more sustainable by introducing a recycled glass fiber with minimal loss in quality. In a first step, the blade material will be examined more closely with a thermogravimetric analysis to find out what kind of plastic it is and what temperature would be necessary to pyrolyze it. This information will be used to conduct an experiment in a molten salt solution and determine the necessary reaction time and temperature. This data will be used to compare the costs of this method with shredding the material and the conventional pyrolysis. From the thermogravimetric analysis, it was possible to determine that the type of plastic used in this turbine was made out of epoxy. The maximum degredation of this material occurred at 380 ◦C. Not many experiments could be conducted in order to find the optimal conditions for the pyrolysis process due to difficulties with the furnace. Nevertheless, one sample was successfully pyrolyzed at a temperature of 400 ◦C with a residence time of 15 minutes. With the current market conditions in the recycled glass fibers industry, this product would be too expensive and the demand would be too little. However, the market is expected to grow in the next couple years due to rising interests in circular economy and governments introducing regulations. Nevertheless, it is necessary to increase the efficiency of the molten salt pyrolysis in order to be applicable to a bigger scale. More experiments should be conducted with cheaper molten salt in order to sink the costs of the process. © Uppsala University Kerstin Benz

Microwave pyrolysis as a method of recycling glass fibre from used blades of wind turbines

Recycling Glass Fiber from Polyurethane Composite by Pyrolysis Strategy with High Mechanical Properties

Pyrolysis-recycling Utilization Properties Waste Wind Turbine Composite Blades

Recovering high-quality glass fibers from end-of-life wind turbine blades through swelling-assisted low-temperature pyrolysis

Study on isothermal pyrolysis and product characteristics of basic components of waste wind turbine blades

The Use of Carbon Fibers Recovered by Pyrolysis from End-of-Life Wind Turbine Blades in Epoxy-Based Composite Panels

End-of-life wind blade recycling through thermal process

The pyrolysis of end-of-life wind turbine blades under different atmospheres and their effects on the recovered glass fibers

Research on Microwave Pyrolysis Recovery and Reuse Performance of Carbon Fiber Composites

Experimental Study and Process Simulation on Pyrolysis Characteristics of Decommissioned Wind Turbine Blades

Evaluation of Mechanical Properties and Pyrolysis Products of Carbon Fibers Recycled by Microwave Pyrolysis

Analysis of the pyrolysis process, kinetics and products of the base components of waste wind turbine blades (epoxy resin and carbon fiber)

Zero–Waste Recycling of Fiber/Epoxy from Scrap Wind Turbine Blades for Effective Resource Utilization

Recycling of waste wind turbine blades for high‐performance polypropylene composites

Recovery of carbon fiber from Carbon Fiber Reinforced Polymer waste via microwave molten-carbonate pyrolysis

Recycling of both resin and fibre from wind turbine blade waste via small molecule-assisted dissolution

A study on the characteristics and thermal properties of modified regenerated carbon fiber reinforced thermoplastic composite recycled from waste wind turbine blade spar

In-situ pyrolysis kinetic analysis and fixed-bed pyrolysis behavior of ex-service wind turbine blades

Recovery of Carbon Fibre from Waste Prepreg via Microwave Pyrolysis

Potential recovery of glass and carbon fibers from wind turbine blades through different valorization techniques

Recovery of styrene-rich oil and glass fibres from fibres-reinforced unsaturated polyester resin end-of-life wind turbine blades using pyrolysis technology