Abstract:The increasing rates of plastic production and waste plastic accumulation pose a serious challenge to the society, environment, and economy. Current mechanical recycling process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process, which calls for more efficient recycling strategies. Catalytic microwave-assisted pyrolysis could serve as a feasible approach to chemical recycling of waste plastics and producing fuel and petrochemical feedstocks such as naphtha. This lecture presents a series of our recent work on the aspects of pyrolysis reactor design and catalyst development with the goal of advancing this technology towards industrial applications. A lab-scale continuous microwave-assisted pyrolysis system with a processing capacity of 200 kg plastics per day was developed, which features continuous downdraft operation and a mixing ball bed reactor. The incorporation of silicon carbide as microwave absorbents into the microwave heating process enabled fast, uniform and energy-efficient heating for the process. A baseline test of the system using conventional ZSM-5 catalyst obtained a 57 wt.% yield for C5-C22 liquid hydrocarbons from polyolefin-based plastics. Energy saving of the process compared to production of similar products from virgin materials was estimated to be 32% by using the Materials Flows through Industry supply chain analysis tool. In order the improve the yield and quality of the liquid hydrocarbon products, a series of catalysts were tested and compared on a lab-scale setting. Notably, relay catalysis of Al2O3 followed by ZSM-5 achieved up to 100% conversion into monoaromatics and C5-C12 alkanes/olefins at a catalyst to plastic ratio of 4:1; Y5.1, F20 zeolites and Al2O3 promoted the production of alkanes and alkenes mainly in the C5-C23 range; MCM-41 led to the formation of C13C23 alkanes and alkenes with a selectivity of 86.6%; ZSM-5 favored the production of aromatics with a selectivity of 70%. In addition to developing and selecting the proper catalyst material, the catalytic reactor also needs to be carefully designed such that sufficient heat and mass transfer within the catalyst bed is ensured during operation and the catalyst regeneration procedure can be conveniently practiced. Conventional designs such as the randomly packed bed could be problematic in the process since catalyst deactivation and coke/wax build-up is very likely. A probable solution to this issue is a structured catalytic reactor consisting of a structured packing with coated catalysts, e.g. ZSM-5 coatings on a SiC foam support. This structured catalyst has been tested in a lab-scale setting for upgrading pyrolytic vapours and results showed that it outperformed many other catalytic reactor designs in terms of catalytic activity and stability. In addition, the composite catalysts could be regenerated and reused while well preserving its material properties and catalytic activity after multiple reaction-regeneration cycles.

Chemical Recycling of Plastics by Microwave‐Assisted High‐Temperature Pyrolysis

Chemical Recycling of Polyolefin Waste: from the Perspective of Efficient Pyrolysis Reactors

Progress of Research on Chemical Upcycling of Plastic Waste Based on Pyrolysis

A Review on the Microwave-Assisted Pyrolysis of Waste Plastics

Microwave‐assisted Pyrolysis‐A new way for the sustainable recycling and upgrading of plastic and biomass:A review

Continuous process design of the microwave chemical recycling of waste plastics using microwave-absorbing heating elements

Catalytic microwave-assisted pyrolysis for chemical recycling of plastic waste

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Microwave-assisted catalytic technology for sustainable production of valuable chemicals from plastic waste with enhanced catalyst reusability

Waste Plastics Chemical Recycling in the Context of Refining and Petrochemical Industries

Micro-wave induced pyrolysis of low density polyethylene (LDPE) and biodegradation of resulting wax in soil and by defined microbial consortia is closing the loop towards LDPE upcycling

Chemical recycling of mixed plastic waste via catalytic pyrolysis

Chemical recycling of polyolefins: a closed-loop cycle of waste to olefins

Pyrolysis of plastic waste: Opportunities and challenges

Tandem pyrolysis catalytic reforming of plastic waste to high-yield monocyclic aromatics by one-step microwave catalysis

Microwave-driven upcycling of single-use plastics using zeolite catalyst

Chemical recycling of plastic waste for sustainable polymer manufacturing – A critical review

Thermochemical Recycling of Waste Plastics by Pyrolysis: A Review

From plastic waste to wealth using chemical recycling: A review

Chemical Recycling of Mixed Polyolefin Post-Consumer Plastic Waste Sorting Residues (MPO323)—Auto-Catalytic Reforming and Decontamination with Pyrolysis Char as an Active Material

Chemical recycling of plastic waste via thermocatalytic routes