Abstract:At present, special attention is paid to the issues of increasing the wear resistance of the surface layers of the material of rubbing parts and reducing the energy consumption for friction. It is possible to form surface films with high tribological properties by introducing various metal-containing additives into the base oil, which, depending on the design and technological features of the friction pair and operating conditions, can differ significantly. In order to study the mechanism of action of various additives to oils from the point of view of the formation of surface layers with effective operational properties, the tribological properties of experimental lubricating compositions were determined and the morphology of the friction surfaces of machine parts was investigated. For comparative tests, the following additives were chosen as samples - MOTOR DOKTOR (MANNOL) and the metal-cladding additive Cluster. As a result of laboratory tribological tests of friction samples on pure MS-20 oil and containing tribological preparations MANNOL (MOTOR DOKTOR) and Cluster, it was found out that the use of the Cluster nanoadditive led to a decrease in the friction moment by 80% in comparison with the additive MANNOL (MOTOR DOKTOR) and 1.48 times compared to MS-20 oil. During the test, the wear of the pad of the model friction pair operating on MS-20 oil with the Cluster additive decreased by 3 times compared to the wear on MS-20 oil with the MANNOL additive (MOTOR DOKTOR) and 26 times compared to the base oil MS-20. On the working areas of the friction surfaces of the model samples after their operation on MS-20 oil with MANNOL (MOTOR DOKTOR) and Cluster additives, the formation of films of various nature and secondary structures is observed, which are manifested by a specific relief structure. Such a change in the surfaces of the working sections is associated with the peculiarities of the influence of various compositions of additives in the oil not only on the processes of friction and wear, but also on structural and phase changes in the surface layers of metals in friction samples.

Effect of Ozone Oxidation and Modification with a Carbon Framework on the Tribotechnical Characteristics of a Plastic Lubricant

Application of Raman Spectroscopy to Evaluate the Structure Changes of Lubricating Grease Modified with Montmorillonite after Tribological Tests

Influence of structural factors on the tribological performance of organic friction modifiers

The impact of organic friction modifiers on engine oil tribofilms

Effect of catalytic esterification on the friction and wear performance of bio-oil

Synergistic lubrication effect of antioxidant and low content ZDDP on PFPE grease

Synthesis and Tribological Properties of a Cyclic Phosphate Ester as Elevated Temperature Lubricanting Additive

Tribological and Chemical–Physical Behavior of a Novel Palm Grease Blended with Zinc Oxide and Reduced Graphene Oxide Nano-Additives

Tribological performance of lubricating oils with iron tribopairs under elevated temperature and pressure in carbon dioxide refrigerant

Research the effect of additives on tribological characteristics of lubricant material and morphology of friction surfaces

Influence of ZrO2 Nanoparticle As Additive on Tribological Property of Lithium Grease

Effect of Oxygen and Moisture on the Friction and Wear of Carbon Fiber-Reinforced Polymers

Tribocarbonisation of a Synthetic Engine Oil in Lubricated Piston Ring/cylinder Bore Sliding Contact and Its Relation to Friction and Wear

Frictional behavior and tribo-carbonization of a synthetic engine oil (SJ/CF/5W-30) with different tribo-materials under stepwise heating conditions

Influence of Oxidative Degradation of Lubricant and Anti-Friction Modifier on Tribological Behavior of Cylinder Liner/Piston Ring

Tribological performance study of zirconium phosphate as an additive in titanium complex grease

Comparative tribological investigation of castor oil and its transesterified and aminolyzed derivatives

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Digging into the friction reduction mechanism of organic friction modifiers on steel surfaces: Chains packing vs. molecule–metal interactions

Physicochemical Tribomechanics of Antifriction Materials Operating in Heavy-Loaded Friction Pairs in Active Lubricating Media

The Mechanical and Tribological Properties of Anodic Oxidation Treatment Carbon Fiber-Filled PU Composite